Oil pressure

[Bastard]

Do any of you know what the oil pressure is on a bandit from the crankcase to the rocker cover was thinking of modifying one to be the oil feed for my turbo and splitting the other. Any suggestions?

[latheboy]

I don't know what the pressure is but i think it's more flow than pressure from that pump..
I've taken oil for the turbo from under the ign cover... First picture on the link below..
It's were most people get the oil from.

http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=3278&whichpage=5

[Bastard]

thats where I was going to take it from origanlly Ivan but have had a strange idea about mounting the turbo at the rear of the block near the generator whilst still being blow through hence looking at an alternative oil feed as it would also be easy to put the oil return in above the clutch.By the way what size restrictor are you using in the feed to the turbo?

[latheboy]

No restrictor yet, i want to see how much oil it gets..

It's not a roller bearing turbo so needs a bit more oil.
Once it's on the dyno ill be able to check that out.