Mikuni 38mm rs carbs settings

[alfiestorm]

while I have a few moments here are the settings on my carbs.
Main jets are 140's
pilots are 17.5's
float heights are 16.5mm from gasket surface to top of float when carbs are upside down
Fuel mixture screws are 3.5 turns out from fully in.

Remember that these settings are for my engine in it's current state of tune and exhaust system but should give you a good starting point or be ok straight away.
Engine specifications are in the your ride section.

:D

[Seifer]

I was just thinking today about getting a thread where people who have their carbs well tuned can post their carb settings. Also include the main mods to the bike and bike type so that way if we have anything similar we can get a good starting point. Thoughts?