thewiz
30-10-2010, 01:57 AM
ok i have a dyno tune nos kit I bought this of steve at r rated parts a few weeks ago for $400 its still sealed in the bag it come in the 12oz bottle is polished and the mount to.
I should of spent the money on things that need to be do first.
$350
This DynoTune dry kit will add up to an additional 80HP to your Ride. Comes with eveything you need for a complete installation for 1 bottle and bracket kits. This is ideal for folks with a single high mount exhaust! This Dry kit uses your bikes EFI sensors to add the additional fuel needed to make the Power! By passing the cool nitrous charge past the Air Temperature sensor in the intake track, we can fool the bikes EFI system into adding the little extra fuel you need to make some sweet power! Note: Consult your factory manual to make sure you have a "Air Temperature" sensor in your intake (Most EFI Bikes have a Temp sensor). Comes with three jet settings of 15HP, 30HP, and 40HP.
Bottle twists on to mount so changing bottles is a ten second process, great for the race track!
Kit Comes complete with instructions on how to use your Horn or starter for nitrous activation making it a clean installation.
The Base kit includes the following:
-- 1 12oz polished Nitrous Bottles
-- 1 Billet bottle mounting brackets
-- 1 two foot stainless bradied nitrous lines
-- 2 Nozzles with mounts
-- High flow Nitrous Solenoid
-- Three nitrous jets
-- Electrical kit with switch, terminals etc.
-- High Pressure teflon tubing and compression fittings.
-- Nitrous bottle fill adaptor. Bottles simply twist off in seconds for the ulitmate in quick filling.
http://www.dynotunenitrous.com/store/ProdImages/single_bottle_efi_bike_large.JPG
I should of spent the money on things that need to be do first.
$350
This DynoTune dry kit will add up to an additional 80HP to your Ride. Comes with eveything you need for a complete installation for 1 bottle and bracket kits. This is ideal for folks with a single high mount exhaust! This Dry kit uses your bikes EFI sensors to add the additional fuel needed to make the Power! By passing the cool nitrous charge past the Air Temperature sensor in the intake track, we can fool the bikes EFI system into adding the little extra fuel you need to make some sweet power! Note: Consult your factory manual to make sure you have a "Air Temperature" sensor in your intake (Most EFI Bikes have a Temp sensor). Comes with three jet settings of 15HP, 30HP, and 40HP.
Bottle twists on to mount so changing bottles is a ten second process, great for the race track!
Kit Comes complete with instructions on how to use your Horn or starter for nitrous activation making it a clean installation.
The Base kit includes the following:
-- 1 12oz polished Nitrous Bottles
-- 1 Billet bottle mounting brackets
-- 1 two foot stainless bradied nitrous lines
-- 2 Nozzles with mounts
-- High flow Nitrous Solenoid
-- Three nitrous jets
-- Electrical kit with switch, terminals etc.
-- High Pressure teflon tubing and compression fittings.
-- Nitrous bottle fill adaptor. Bottles simply twist off in seconds for the ulitmate in quick filling.
http://www.dynotunenitrous.com/store/ProdImages/single_bottle_efi_bike_large.JPG