7/11 parts for sale

[Watto]

updated 6/11

89 L model frame with subframe cut off/had plates welded to fit 04 750tail (i can remove the plates so is back to standard frame without subframe)

1100 slabby motor - no carbs/fitted with 34mm rubbers

36mm slingshot carbs with trumpets/screens

03 gsxr front end complete incl wheel fitted with 320mm discs/radial brakes/bearings to suit slingy frame - triples are 04/gixxer 1000 with top clamp drilled for risers

03 gsxr 750 swingarm complete with 5.5" wheel, rear caliper/torque arm, cbr1000rr shock and custom top shock mount to suit slingy frame

chromed clutch cover to suit slingy/slabby

dyna ignition

1 x wiring harness

front rear/slingy seats, tail plastics with light (tail plastics ok condition)

couple of pairs of 7/8 risers

03/04 gixxer1000 front guard

ducati monster front guard

chrome projector bullet headlight (has hi/lo beam in single unit)

triumph t595 (daytona/speed triple) front guard

triumph t595 showa 45mm forks with 0.95kg whitepower linear springs (standard springs also included)

bandit switchgear

slabby switchgear (have to check on that might be slingy)

nbr of stock plastic reservoirs

ducati 916 stock underseat exhausts (no clamps/link or header pipes)

[greg mulligan]

Hi mate would be interested in

mre lock up clutch to suit 1100 slabby and MRE deep dish cover

2 x MTC engineering lock up clutch spacer plates
windowed crank cover for slabby (tes engineering
billet 2 piece ignition cover

[Deano]

hey mate.

what about the billet sprocket cover. has that been spoken for?

[Watto]

greg - pm'd ya mate

deano - billet sprocket covers gone

[wackyrider]

Could u pm a pic of the billet reservoirs mate

[Seifer]

Im in for the fuel tap if its still free. Info?

[Watto]

wacky - will do but Camlark had shot me a mail before about em but will send a pic in case he doesnt want them

seifer - will pm ya

[Watto]

quote:Originally posted by Seifer

Im in for the fuel tap if its still free. Info?


heres the pics mate $50 + post

http://www.asfphotos.com/upload/1288114126.jpg


http://www.asfphotos.com/upload/1288059998.jpg

[OZ750L]

Watto,

What you got left?

[Watto]

hey mate updated the list at the top with whats left

[fimpBIKES]

would ignition work on a katana? how much $$$?

[80s freak]

What model dyna?

[Gsxar]

Interested in wiring if you have any left

[Watto]

hi guys

am in china at the moment and back in oz nxt monday

is an dyna2000 with trigger plate and crank trigger - it is a few years old - will chck moel number when i get home
fimp not sure if woud fit a katana - need a suzi guru to answer that one - looking for $200 + post
gsxar - still have 1 harness left at this stage (i think as not accessed emails from up here - will check when bck at home and let you know

cheers
watto

[George Mac]

Could be interested in the front end if it is still available and would fit a B12.
Cheers
George

[80s freak]

Hey Fimp if you don't want the Dyna I call second dibs.

[collie]

Het mate did u get my mail??

[collie]

Het mate did u get my mail??

[Watto]

quote:Originally posted by collie

Het mate did u get my mail??


pm'd ya mate

[Watto]

quote:Originally posted by 80s freak

Hey Fimp if you don't want the Dyna I call second dibs.


heres a pic of the dyna


http://www.asfphotos.com/upload/1289973077.jpg


http://www.asfphotos.com/upload/1289991366.jpg


http://www.asfphotos.com/upload/1290044354.jpg

[80s freak]

Sorry haven't got back to you earlier, going to have to hold off on any purchases for the moment mate. Will contact you when things come good. Cheers.