cbr9 front end swop help wanted

[cbr900rrn]

hi all got a cbr 900 rrn 93 want to fit usd front end as use bike every day except week ends what is best front end to use .my blade as a speedo drive or what front ends have you used and what mods need to be done .thanks if you can help

[Gitzy]

Go introduce yourself here Nate http://www.streetfighters.com.au/forum/forum.asp?FORUM_ID=26, we like that round here.. hopefully you don't use this info and run hey[B)].. I'd say this is the easiest conversion but you might have to talk to Nick for more info on speedo etc.. Hope this helps a little..

Nicks bike is a 94 CBR 900 and to simply quote the man...


quote:Originally posted by nick76

an 07 Front end slotted straight in.



quote:Originally posted by nick76


http://www.asfphotos.com/upload/1282134514.jpg

[nick76]

Yep,07 blade front end slotted straight in.

Just need to grind backthe steering stops as much as you can,coz even with them ground off the frame,(coz thats all i could get at while it was all together)the turning circle will be pretty shitty,and i wasn't fucked pulling it apart again,to grind back any of the stop on lower triple clamp.
I got my info of Robmac,on here.

You'll probably find most of the blades front ends will fit in reasonably easily.Don't quote me on that tho.

Here's a more recent pic.

http://www.asfphotos.com/upload/1286791640.jpg


Not sure on the speedo drive tho,as my bike didnt have one when i got it.