1981 cb1100f ,need some info

[RevHead]

ive got a friend who wants to fighter it ,update the swinger rear wheel brakes,front end,wheels and brakes ,anyone done one,whats the best model to get parts off, i was considering looking for a cbr1000f parts,any help welcome cheers[}:)]

[Chris41]

I've put ZZR600 swingarms and rear wheels and GSX1100 arms and GSXR wheels in 1100 and 900s
http://i227.photobucket.com/albums/dd102/chris-41/DCP_0035.jpg
Valuable website
http://www.cb1100f.net/modules.php?name=Forums

[RevHead]

was the swinger a bolt in and is the width the same dimentions as the old cb frame,cheer

[Chris41]

This build was a while ago but I wouldn't use a ZZR swingarm again unless you want a longer wheel base the fit wasn't to bad some 3mm washers either side and an internal bush to math the Honda 16mm
pivot but I had to machine the axle slots and cut and shut the bracing at the front.
Heres a link to Andy from Adelaide's build, it's a good one
http://www.cb1100f.net/modules.php?name=Forums&file=viewtopic&t=10095&postdays=0&postorder=asc&start=0
http://i287.photobucket.com/albums/ll137/CB1123F/CB1123/CB112300258.jpg

http://w3.bikepics.com/pics/2007%5C11%5C12%5Cbikepics-1085235-full.jpg

[Large]

That looks pretty fucking good

[oldskool]

Make some measurements Pete and let me know Iv got ZZR1100, R6 etc swingers if they fit.

[RevHead]

quote:Originally posted by oldskool

Make some measurements Pete and let me know Iv got ZZR1100, R6 etc swingers if they fit.
cheers i,ll get onto it tomorrow ,:D

[Chris41]

pivot spacing between frame approx, 248mm.
1100F pivot to axle average, 505mm, 4.50 ZZR wheels, chain lines up pretty well stock front sprocket.
for wider I believe a CBX1000 front sprocket is slightly offset.

[RevHead]

chris your a bloody wise fella