EOI GSXR starter and ingition cover windows

[Deano]

they have only been 4 years in the making but finially got around to knocking out a starter and ignition cover window insert for oil cooled gsxr and bandit

as you all know i did and still have the clutch cover windows so now you can collect all 3 (number 4 is in the pipeline)

like the clutch windows i am prepared to make some for your viewing pleasure.

prices are as follows for asf financial members (plus $25 for non members)
$230 for the clutch cover (fitted to your cover add $70)
$215 for the starter cover (fitted to your cover add $70)
$200 for the ignition cover (fitted to your cover add $70)

turnaround should be only a few days at most.

10% discount will apply if you already have one of my clutch covers or buy more than 1 of the above.

http://www.asfphotos.com/upload/1284659367.jpg


http://www.asfphotos.com/upload/1284704569.jpg


http://www.asfphotos.com/upload/1284657478.jpg


http://www.asfphotos.com/upload/1284716677.jpg

[oldskool]

Noice work, wish I didnt have kids sometimes, I will have one off ya just not at the mo.

[crazymofo]

are you interested in doing some for the k-series gsxr's?

they look great....almost makes me wanna trade my k4 in on an oiler....

cheers.joe.

[Deano]

quote:Originally posted by crazymofo

are you interested in doing some for the k-series gsxr's?

they look great....almost makes me wanna trade my k4 in on an oiler....

cheers.joe.


i have a k1/2 1000 clutch cover here that i was going to try to work with. shouldn't be to much trouble. what k series do you have

[crazymofo]

k4 gsxr 1000

happy to post you down a set of covers to expereiment with

cheers.joe.

[Rocket]

I'm in Deano. I'd want the stator and ignition cover windows, fitted.
Just yell out when you want me to send them over.
Fuck that clutch looks cool in that pic !

[JackTar]

quote:Originally posted by oldskool

Noice work, wish I didnt have kids sometimes, I will have one off ya just not at the mo.


Not as much as they do. :D

[xa-mont]

have you got any progress pics of how this was done? wouldn't mind trying to do something similar for the SV.

[Deano]

quote:Originally posted by crazymofo

k4 gsxr 1000

happy to post you down a set of covers to expereiment with

cheers.joe.


cool mate send em i will have a crack.

[Deano]

quote:Originally posted by Rocket

I'm in Deano. I'd want the stator and ignition cover windows, fitted.
Just yell out when you want me to send them over.
Fuck that clutch looks cool in that pic !


when your ready mate i will work around you.

[Deano]

quote:Originally posted by xa-mont

have you got any progress pics of how this was done? wouldn't mind trying to do something similar for the SV.


no progress picks sorry but as for the fitting it can be as easy or as hard as you want to make it. like everything if you have the right tools you can do anything. lathe and mill are pretty much a must for this job.

[xa-mont]

quote:Originally posted by Deano
lathe and mill are pretty much a must for this job.


That's not the answer i was after :P

[Watto]

I'd be interested in an ignition cover Deano

can you PM us your addy for postage

Let us know how ya go when playing with Joes K4 gear as might look at a set for my 1000 as well if all goes well

Cheers
Watto

[thewiz]

i want some for my speed triple they look good well done.

[Deano]

quote:Originally posted by Watto

I'd be interested in an ignition cover Deano

can you PM us your addy for postage

Let us know how ya go when playing with Joes K4 gear as might look at a set for my 1000 as well if all goes well

Cheers
Watto


ok mate done

[Deano]

quote:Originally posted by thewiz

i want some for my speed triple they look good well done.


put up a pic of the cover

[STM77]

I'd be in for a clutch cover

[Deano]

quote:Originally posted by STM77

I'd be in for a clutch cover


have them already made, send me your cover if you want me to fit it

[Watto]

quote:Originally posted by Deano


quote:Originally posted by thewiz

i want some for my speed triple they look good well done.


put up a pic of the cover


Andy/Deano - potentially the hiccup with triumph covers are that they are made of magnesium....not sure how you would weld that (but then again I'm not a welder)

[Rocket]

quote:Originally posted by Deano


quote:Originally posted by Rocket

I'm in Deano. I'd want the stator and ignition cover windows, fitted.
Just yell out when you want me to send them over.
Fuck that clutch looks cool in that pic !


when your ready mate i will work around you.


Right you are then, I'm officially unemployed since 2 hours ago so i will get around to pulling them off and sending them to you next week when I get out of bed.
About time I put that slut up on the work bench anyway.

[BANDITROD]

awesome mate as i have already told you i am keen for both and my clutch will prob need modifying aswell to suit lock up id say

Nice clutch locker Deano.Are you making them with your new machinery yet? btw,send the read back soon.
cheers

[Deano]

quote:Originally posted by Watto


quote:Originally posted by Deano


quote:Originally posted by thewiz

i want some for my speed triple they look good well done.


put up a pic of the cover


Andy/Deano - potentially the hiccup with triumph covers are that they are made of magnesium....not sure how you would weld that (but then again I'm not a welder)

that could be an issue but then again depending on how it looks it could be worked around. anything is possible

[Deano]

quote:Originally posted by Rocket


quote:Originally posted by Deano


quote:Originally posted by Rocket

I'm in Deano. I'd want the stator and ignition cover windows, fitted.
Just yell out when you want me to send them over.
Fuck that clutch looks cool in that pic !


when your ready mate i will work around you.


Right you are then, I'm officially unemployed since 2 hours ago so i will get around to pulling them off and sending them to you next week when I get out of bed.
About time I put that slut up on the work bench anyway.


ok mate will pm my addy to you.

[Deano]

quote:Originally posted by BANDITROD

awesome mate as i have already told you i am keen for both and my clutch will prob need modifying aswell to suit lock up id say


good thing i have your bike then mate.

[Deano]

quote:Originally posted by davo

Nice clutch locker Deano.Are you making them with your new machinery yet? btw,send the read back soon.
cheers


the lock up is a loaner from BlackKat. it has been measured and will be reproducted with a few mods soon

[thewiz]

il get the pix in the morning thanks man.

[thewiz]

here are some pix it may be hard to do any thing with these.

http://i260.photobucket.com/albums/ii21/Mullman2000/MoreFish/DSCF3796.jpg
http://i260.photobucket.com/albums/ii21/Mullman2000/MoreFish/DSCF3797.jpg
http://i260.photobucket.com/albums/ii21/Mullman2000/MoreFish/DSCF3798.jpg

[Deano]

sorry mate no good. working with the cable clutch for a start would price the job out of the water.

[BANDITROD]

quote:Originally posted by Deano


quote:Originally posted by BANDITROD

awesome mate as i have already told you i am keen for both and my clutch will prob need modifying aswell to suit lock up id say


good thing i have your bike then mate.
cheers mate your a champ

[thewiz]

quote:Originally posted by Deano

sorry mate no good. working with the cable clutch for a start would price the job out of the water.
thanks for looking deano .please let me no if there is any other things you make that i can use on my bike mate thanks .

[Watto]

G'day Deano

interested in getting the ignition cover off the slabby done - wasn't sure if the raised dome in the cover would cause you any issues or if different from a slingly cover?

http://www.asfphotos.com/upload/1285719431.jpg


Cheers
Watto

[Deano]

the raised section has proved to be a challenge but managed to work my way around it. the covers are the same from all the 750 and 1100 oil cooled motors as far as i can tell mate.

[Kamakazebusa]

Thats very nice Deano....great skills u got there.