cbr fighter?

[Jockney Rebel]

looks great mate remeber weve gto a bike shower whenits all together yeah

[Phill]

http://www.streetfighters.com.au/forum/upload/41709470288628.JPG

I started to rewire the bike with some new bits, particularly after the last AFR i made it too!!

[Phill]

http://www.streetfighters.com.au/forum/upload/41709470267459.JPG

this was the next bit to fit. wiring was piss easy. mounting was easy (after i took the grinder to the old ignition barrel mount)

[Phill]

http://www.streetfighters.com.au/forum/upload/417094702107491.JPG

unfortunatly between the dash and the tail wiring assy was this sh1t fight. have spent nearly two weeks sorting this out only to get it working properly and not be able to finish wrapping it up it cause ive got the flu!!! can barely see straight let alone retape the wiring properly.

[opindown]

looks like fun. get well soon mate.

[Weaselman]

we'll see you soon mate cant wait to see it runnin down the hwy

[Phill]

FUCKING DISASTER!!!!

I filled up on flu tabs, got up early to a strong coffee and headed to the shed.


finished wiring up and before I taped it all and tied it in place i tested it.
all the warning lights lit up,the dash works, the engine cut out works the neutral shut out works, blinkers blink etc, etc.the fucker ever starts and runs. YEE HAA i thought.
taped the wiring, fitted it into place and cable tied it up.
went to test again then the smoke from the remote start box escaped shortly after burning half the wiring out.
SHIT SHIT SHIT SHIT SHIT.
FARK
BOLLOX.
is the pub open yet?

[Phill]

p.s. the remote start box is fucked!
HEY BEN. can i get away with running a small strand of wire from the power in on the board to the soldered joint and again back out?
you know, the one where those copper? plated lines that used to be on the circuit board were?
Phil

[Phill]

http://www.streetfighters.com.au/forum/upload/35925015532616.jpg

I think im getting somewhere, probably in the road though.

[Phill]

http://www.streetfighters.com.au/forum/upload/35925015538962.jpg

side profile needs a little work but its happening

[Phill]

http://www.streetfighters.com.au/forum/upload/35925015537885.jpg

Im even converting fairying'd bike riders to the way!!
Worship the fighter gods ya bum!!


not really Simons just taking a progress pics.

[Phill]

http://www.streetfighters.com.au/forum/upload/35925015540753.jpg


See its not all that bad mate is it!!
IS it?
really?[8)]

[Jockney Rebel]

farkin cool mate

[Gix11]

Is she gonna be ready for the AFR mate? Make sure those dog bones are nice and strong this time.

[SIM750]

http://i627.photobucket.com/albums/tt355/Rodden5/phillsfighter.jpg
Just some fairings and paint then shes ready to go :D

[Phill]

You've got some spare fairings on your bike havent ya Sim? just rip them off and Ill take them "HOME" so i can chuck them in the, whoops no no, "MAKE" a custom bin, no sorry, bracket for them to fit in the bin eerr on the bike, yeah thats what i meant!

[SIM750]

http://www.streetfighters.com.au/forum/upload/77717450153506.jpg

There you go Phill ready for paint

[Phill]

YEAAAAGH!! What the fuck have you done???


NEVER EVER Leave your bike with a bloke that can use fibreglass :D

[SIM750]

http://www.streetfighters.com.au/forum/upload/777174597116790.jpg

Is this better ya sook

[Phill]

:(:(:(

:)[:o)]

[bikerbazz]

looking good what coler are you going to pant it [8D][8D]

[Phill]

http://www.streetfighters.com.au/forum/upload/77717675532355.jpg


new exhaust system! looks heaps better now.

[Phill]

Hey Bazz

Bike will be rattle can red and black at this stage courtesy of Bunnings.

[SIM750]

Whats happening Phill? Your seat pod is finished and seat is getting upohlstered . Get your bloody bike back to my shop so we can do final touches . Dont give up now YOU CAN DO IT:)

[Jockney Rebel]

see ya s up there ..enjoy the ride phill keep intouch

[Phill]

Holy Thread revival bikeman! Im at it again!

Courtesy of PommyChopper
http://www.asfphotos.com/upload/1284887874.jpg


http://www.asfphotos.com/upload/1284883097.jpg


http://www.asfphotos.com/upload/1284874734.jpg

[Phill]

After seeing these pics I decided Pommy Shaun is EVIL.
The subframe is better than the rest. Now i have to do a great job on the rest to do his work proper justice.


Thanks Shaun.: )

[Phill]

Just Some teaser pics from Shaun at PommyChopper.

[BANDITROD]

looks the good mate its coming along nicely and as you prob know you cant rush these things

[Phill]

ok new problem!
got a cbr 900 front end off Nick.
biggest problem is theyre about 70mm too short. everything else fits easy. same head stem bearings,although i have to swap the stem for the longer 1000 one,17" front wheel fits srraight in just change the spacers, brakes fit . just the forks are too short.

anyone got any info on fork extensions? did a search and emailed EXBEN but want to know if anyone has a bike with them on. how do they work anyway? do you keep all the adjustability from the top, are they just caps? do they screw into the tube or sit over the top?
never seen a set so i got no idea

[Iceman]

Phill, mine just sit over the top. To give that beefy look I extended them all the way to the bottom tripple and then had some sleeves made up to run from under the bottom triple to the bottom for the fork leg. It makes the fork leg look like it's 60mm round.