Redmohawk
28-07-2010, 01:47 PM
Ok boys n girls I've found a toy you peeps might be interested in is a Mid 90's Suzuki RF600 motor but has been massaged big time talking drag bike or very very nuts road bike, Internals are wisco forged very high comp pistons new rings rf600 bottom end mixture of rf900 bores and rf600 heads with very lumpy custom ground cams motor has been torn down after some one was caught cheating in formual 500 class lol motor is 645cc if you care but compression is around 16 to one so we are talking Methanol or top grade race fuel here people's.
Motor has been put back together after race officials handed back the box of bits buy a mate of mine, motor is rebuilt top to bottom with new rings and hone to. To bulid to the same specs if you do it yourself minimum $1600 without motor casings etc in parts alone. Also comes with nice 4 to 1 headers that can be swapped eather side output ally longer intake runners and compleat ignition system coils etc (has new mounting plate for magnito that needs a little maching to finish off, little job) Also comes with a set of standardish carbs but there setup for petrol so will need rejetting for race fuel at the minimum or some flatslides if you really want to make this puppy pump. $900 no offers unless there higher (motor is mine)
Motor has been put back together after race officials handed back the box of bits buy a mate of mine, motor is rebuilt top to bottom with new rings and hone to. To bulid to the same specs if you do it yourself minimum $1600 without motor casings etc in parts alone. Also comes with nice 4 to 1 headers that can be swapped eather side output ally longer intake runners and compleat ignition system coils etc (has new mounting plate for magnito that needs a little maching to finish off, little job) Also comes with a set of standardish carbs but there setup for petrol so will need rejetting for race fuel at the minimum or some flatslides if you really want to make this puppy pump. $900 no offers unless there higher (motor is mine)