FighterMC's Blade "Started work on the blade"

[FIGHTERMC]

http://www.streetfighters.com.au/forum/upload/74544011840645.jpg


also have one of outlaws headlight fairings to go on it.

[Gix11]

Keep it coming mate......

[FIGHTERMC]

http://www.streetfighters.com.au/forum/upload/32972778256934.jpg

ditched the exhaust after the pic was taken.

[HueyonaBlade]

Fark ace Frank I have been parnoid all this week that I have raised my tail to high but its still even a touch lower than yours so Im ok , get her finished mate I get some pics of mine back together hopefully early this week:D

[Gix11]

That tail and those lines work perfect Frank. I really like this one mate.

[FIGHTERMC]

Thanks Lads,the tail looks high but when your on it
its fine.
fitted a 929 mudguard to it today
and now that i have my shed up i
shoud have it painted and finished shortly.
was going with black but not sure
was thinking along the line of a dark blue{r1 blue}
with a silver strip down the middle.
if any one can photo shop it for me i would be greatful

[BANDITROD]

very nice mate that rim looks wicked

[geesexar]

nice blade there frank looks awesum

[Gix11]

Shove up some photos square on from the side and also one from above looking down on it mate and I'm sure someone will photo shop it for you.

[FIGHTERMC]

http://www.streetfighters.com.au/forum/upload/14841644423081.jpg


this arrived today.
i sold the k6 backend yesterday
also lights have been replaced
and the exhaust is also now changed.
i have a new back wheel to go on
and i have sprayed the bike ASF rattle can black.
i'll put up a few more pic's tomorrow.
rgds

[CBRRRT]

Looking forward to seeing it mate. Gehen Deusch bis du?

[FIGHTERMC]

http://www.streetfighters.com.au/forum/upload/35734130936488.jpg


started on subframe today.

[FIGHTERMC]

http://www.streetfighters.com.au/forum/upload/35734130922294.jpg


this is the wheel i'm using
got it sand blasted and ready
for powder.

[FIGHTERMC]

http://www.streetfighters.com.au/forum/upload/35734130930543.jpg

this is the headlight fairing i'm going with.
should have alot of it done by the end of the
weekend.

[FIGHTERMC]

http://www.streetfighters.com.au/forum/upload/35734130961173.jpg

did some work on the track bike.
a mate of a mate got me the origlnal
log book[V5}in the uk so it is now going to be
used on the road.
fitted risers,bar's,tailight,indicators
and clock bracket.next is headlight and
front indicators and she's ready for the road.

[CBRRRT]

You have been busy matey havent ya. You know what, when my blade is done I think I might get another one and build a full on fighter. I have learned so much about Blades and I've had mine apart so many times I think it would be a natural progression.

[FIGHTERMC]

i find them a very easy bike to work with mate
i have owned 7 blade's so i kinda know my way
around them at this stage.
your right jon i have been busy over the last
few days and hopefully the fighter will be done
by sunday unless i go on the piss lol
rgds

[CBRRRT]

First things first matey lol, have one for me mate.

[FIGHTERMC]

Jon can you see your chain guard
in the pic with the seat unit fitted
its up against the wall LOL
thanks again for that mate.
rgds

[CBRRRT]

LOL Oh yeah mate, missed that ha ha. you are very welcom sir, anything I can do to help give me a call buddy.

To be honest mate your fighter looked done to me with the zukey arse on it, so I cant wait to see what you are cooking up in that mind of yours now.

Just do me one favor mate, HURRY UP! coz I'm not to good at being patient fella.

[houdini]

all you need for the blue one is flatsides ;)

[FIGHTERMC]

very good houdini :>)

[Large]

Going all out this time Frank?

[FIGHTERMC]

quote:Originally posted by Large

Going all out this time Frank?

yes Large mate
it's going german style.

[FIGHTERMC]

http://www.streetfighters.com.au/forum/upload/56668131837860.jpg

got the subframe finished today.
now have the tank fitted
perfect which is not showing in this pic.
also you can see how my exhaust looks now
i'm going to lose the bellypan it just there as a mock up.

[FIGHTERMC]

http://www.streetfighters.com.au/forum/upload/56668131851420.jpg

while i'm at it here's my 1982 rd250 lc
which i have now fitted a tzr125r usd
frondend.got the bike for 500 euro's
cos the guy couldn't start it
but i had it running in no time.
it's taking a back seat at the moment but i'll get at it in
a few month's.
rgds

[opindown]

not bad, will be good to see it when it is complete and finished

[CBRRRT]

I would have loved to have seen the look on your Mrs face when you started pulling it apart again mate.

All mine keeps askin is how much more is this going to cost.

[FIGHTERMC]

she's ok mate it only cost me a new car for her
last year LOL.

[CBRRRT]

Did you manage to get much done over the weekend mate? I fucked about with my tank trying to get it as good as I can ready for paint next Monday, but to be honest there wasnt much I could do. I'm bored to fuck mate, mind you it did give me the chance to clean up my workshop (Shed) workshop sounds better lol.

I'm gonna call the powdercoat guy this afternoon and see when I can drop in my brackety bits. That should take up all of 5 minutes ha ha,

[FIGHTERMC]

Met my mate and he's going to powder the wheel for me
this week.i also gave the headlight fairing and mudguard
another cost of paint.but that was it mate cos i was watching the rugby
and football with a few beers.
once the wheel comes back i can get the tyre on
and i need to paint the seat unit,tank{again} and tidy up
the wiring and she finished.
rgds
Frank.

[FIGHTERMC]

http://www.streetfighters.com.au/forum/upload/2011870536771.jpg

this is what the front look's like

[FIGHTERMC]

http://www.streetfighters.com.au/forum/upload/2011870536172.jpg

now have back wheel fitted
was trying to get it finished but we had
good weather here for a few's day's so i was out on the gixer

[Gix11]

This things changed heaps of times before it's even finished once, you go off Frank! Keen as mustard mate. Keep it coming.

[FIGHTERMC]

http://www.streetfighters.com.au/forum/upload/64694488441858.jpg


as it stands now.

[Surt]

Where the rear wheel comes from mate?

[FIGHTERMC]

It's a 17inch car wheel mate
don't know the name of it.

[CBRRRT]

How's it going mate, any progress on the Blade to report?

[Unlimited]

quote:Originally posted by CBRRRT

How's it going mate, any progress on the Blade to report?


Yeah give us some news we're waiting:D

[HueyonaBlade]

To true lads , where are you FRANK!

[FIGHTERMC]

bike is now finished
and was going to go for a spin today
and the fooking thing is blowing the
main fuse.so i have to go at the wiring tomorrow.
will post some pic's when she is on the road again.

[Unlimited]

Looking forward to see the pics[:p]

Succes with the wiring (my favourite hobby):(

[Gix11]

I've aged a few years since this one started mate so I'm more than ready to see it mate!

[FIGHTERMC]

quote:Originally posted by Gix11

I've aged a few years since this one started mate so I'm more than ready to see it mate!


so true Si LOL
it was one of these one's where i kept changing
my mind or was it that it took so long it
was going out of fashion LOL.
have narrowed it down to one wire
have the loom out and will strip it
in the morning hopefully won't take long.
rgds
Frank.

[CBRRRT]

Well Frank!!!!! Where is it?????? [:p][:p][:p]

[FIGHTERMC]

quote:Originally posted by CBRRRT

Well Frank!!!!! Where is it?????? [:p][:p][:p]

i sold it to a mate and he broke it for parts.:(

[CBRRRT]

N...N...N...Nooooooooooooo!

[FIGHTERMC]

not to worry jonathan i have a new project on the go mate.

[CBRRRT]

TFFT Matey [^]

[customfighterer]

so wheres said new project?

[FIGHTERMC]

my mate griff started a thread for me a few week ago.
i'm having problem with putting up pic at the moment
but should have them up soon.

[CBRRRT]

How is Griff mate, he's not been to good lately. When you see him say hi for me mate.

[FIGHTERMC]

he's nearly back to normal now mate.
he was very sick over the last few weeks.
i'll pass on your good wishes.

[CBRRRT]

cheers matey.