Digital Speedometers and Gauges

[thewiz]

hi guys iv got a 07 triumph speed triple witch im rebuilding the Digital Speedometers and Gauges was damaged the led screen on the left was smashed so im trying to find a replacement i can use maybe and after market one iv seen what's around but will they work on my bike .triumph have told me i have to use there's or my bike wont start has any one ever put a different one one there 07 thanks Andy.

[sharky]

Pm JockneyRebel .....He'll tell you all about the problems...

[thewiz]

ok i email him thank man.

[Jockney Rebel]

their right !! ive had the same set since last year both buggered i bought a set of tiger cloks that look the same but they wont start the bike either [although once started with the old set the tiger ones do work ] so my mate is grafting the screens form the tiger clocks onto my set ..ill let you know if it works
ive tried acewells and they wont start the bike either ..their are sets of aftermarket clocks athat apprently do work but thier almost as expensive as triumph ones [$2000AUD]

[thewiz]

will it run perfectly without the original clocks fitted or not.

[Jockney Rebel]

no ive tried and it wont work at all

[thewiz]

what about one off another speed will that work thanks andy.
the bike has to go over the pitts when its done.

[Jockney Rebel]

quote:Originally posted by thewiz

what about one off another speed will that work thanks andy.
the bike has to go over the pitts when its done.
yeah but it has to be the same model iv got a set of tiger clocks same year but they wont work either ..so its speed triple ones or nuffink

[BANDITROD]

ok i have been thinking about this all day there must be a way around this issue you guys are having so excuse me if i sound like a hack but if you were to start the bike and then start cutting one wire at a time till it died and then trace that wire back into the dash to see where it goes and what it actually does there maybe a way around it .....but it will require breaking perfectly good bits .......small price to pay if you work it out

[Redmohawk]

I'd say a good look n poke in the clocks might be a better bet first mate, as a ex computer/electronics tech I can say I wouldnt go chopping wires while its running till you make sure there nothing in the clocks thats to sensitive to voltage surges etc or the might not get it started again lol

I know very little about the bikes in question but it could be something as simple as a resistor on one line ot as complex as a chip firing a code etc, there are ways to find/sort all these issues just depends how much time you want to spend on it. If your willing to spend some time on it I'd be happy to help if i can. First things first if the clocks are relatively easy to open up without distroying the case etc have a look inside and post up some closeup shots were looking for things out of the ordernary first to give you a clue, then you start poking around in the loom with a CRO (like an engine analiser for elecronics) it will look at each wire one at a time and tell you whats going on when you start and once its running (I have one) is the safer way to hack you bike ign system etc.

[thewiz]

my led screen is smashed on mine il put it apart and show you guys what in side you cant buy led screens for the and a new gauge in perth at jcs is $2150 thats farked.

[Redmohawk]

worst case you can prob fix the led screen mate depends on the damage

[Jockney Rebel]

ill send you a wiring diagram the way i ahd it explained to me is that there are 3 black wires that are a part of the canbus system on the bikes FI/ignition ....these wires transfer info both ways between the ecu and the clock board so that the board can show info from the ecu
ie fuel consumption range etc etc ..but they also form a loop to the ecu via the alarm loom [which is looped itself when not fitted ] ive tried bypassing the alarm loom and looping the black wires to no avail so what yer fella says tabove seems to make snes theres a chip or summat inthe board that s relaying info back and forward to the ecu ..
since the bike still works with out the screens intact im trying to get round the problem by fitting new screens if this proves succesful than ill let you know..nother anomaly thats unique to this bikes is that if the headlamp fuse blows the bike wont start

[gunnie]

there are a couple on ebay around the $400 mark on the UK ebay site. Not cheap I know but cheaper than new. I have two 06 models that had broken gauges and bought replacement clocks on ebay and they both worked ok, with no problems. Item no 200484894581
http://cgi.ebay.com.au/TRIUMPH-Motor-Cockpit-speedo-Speed-Triple-1050-/200484894581?cmd=ViewItem&pt=Motorrad_Kraftradteile&hash=item2eadd4b775

[Jockney Rebel]

cheers
gunnie thats the ones i was on a bout

[thewiz]

thanks yer i look at them .

[thewiz]

there has to be away around this guys there must be away to put another dash on.

[thewiz]

have a look at this what do you think.
http://www.triumphrat.net/speed-triple-forum/146202-digital-speedometers-and-gauges.html

[Jockney Rebel]

ive heard that before about the 120ohm resistor but this guys explains it better id definitely give it a go if i were you [i thought the canbus wires were all black ]

[thewiz]

jimmy i bought this on ebay its of the 08 its just about new.
http://pinwallcycle.com/ebay/bike2137/017.jpg

[Jockney Rebel]

ok but is it off a speedy or a street [ive just got mine back with new screens in em and................ they work ffs!!!]

let s know how you get on with em cos if the whole unit wont work you can strip the screens ou and have them fited tio your board likeive just done

[thewiz]

thanks mate il let you no im picking it up today.

[thewiz]

its sweet jimmy but its in mph can i change that.
http://i260.photobucket.com/albums/ii21/Mullman2000/DSCF3190-1.jpg

[Gitzy]

Pretty sure you can dude, My 09 Street Triple could swap I think by memory...

[thewiz]

just found it works .

For 1050 Sprints & Triples:
1. Turn on ignition
2. Press all 3 buttons until speedo display shows 1,2 or 3
3. To change the the display units press the 'SCR' button (Left button)
4. When you have the correct display press SET (Middle button)

Display modes:
1 - km/h + liters
2 - mph + UK (Imperial) gallons
3 - mph + US gallons

[thewiz]

i got it on ebay for $170 plus $50 for postage fark yer im rapped.

[Jockney Rebel]

wicked mate

[Rocket]

Nice work !
Beats fucken two grand !!

[thewiz]

can any one show me what the dash mount looks like my one was smashed im going to get a mate to rebuild the mount thanks for the help guys i will be on the road in a few more months cant wait to me a few of you.

[Jockney Rebel]

i had acpoy made opf mine form alloy ill smnd you a pic

[thewiz]

thanks jimmy my dash didn,t come with that dome on the back i got to chase one up.