Here ya go Kev the long awaited trailer

[BANDITROD]

just got lights and jockey wheel to go mate i hope ya like it

http://www.asfphotos.com/upload/1276491581.jpg


http://www.asfphotos.com/upload/1276461134.jpg


http://www.asfphotos.com/upload/1276420934.jpg

[oldskool]

Good work big man!!!!!!

[BANDITROD]

thanks mate it has only taken me 16months to complete but i will have it finished this week just in time for the bonfire at glens

[kevkatana]

TOPS!!!!!

[Docktor]

how wide are the tie down points from centre of tyre ? Looks about 350 ish ?. I put 400mm on mine, and it wasnt enough to keep the centre bike really stable. Keep a eye on that bit and what kinda clearance between trailer tyre and guard ? Dropped 3 roadies on mine and it would touch the tyre every now and then on bumps. Making another one now and not making the same mistakes again... Apart from that , nice jigga nigga . Where the ramp and how does it attach ?


Doc

[BANDITROD]

hey doctor if you tie down the bikes the same as i do (from the axle not the bars)then it will be fine and the gaurds have about 80mm clearance (wd40 lid plus a little bit more) this is the same as my old trailer and i never had any issues ...and as for the ramp kev was thinking of getting one of the alloy jobs from repco ($99 bucks when on special) and the best part is its well within requirements to avoid rego .....

[Gitzy]

Great workmanship there Rod, top stuff.

[timbo]

Nice work cupcake im sure Kev will love it

[Docktor]

good stuff rod. Was lookin at them ride in and lock units for my next one. Ask Kev about the drive behind me to AFR last year. Pretty scary to watch my bike in the middle. I too used a wd 40 lid as clearance. I should have used the little bit more rule as u did. Oh well. Live n Learn hey. I know them ramps, they look the shit. Hide it underneath ? . Is that really less than 3 metres long ??

[BANDITROD]

a little postie once told me that you used wd40 lid for cleance but your tyre scrubbed hence the little bit extra ....and yep it comes in at 2965mm from tip to tail mate

[Docktor]

Farknl. Nice job, is it alloy checker or steel ? Either way, I will organise a noddy badge for you and get it posted asap. Good stuff rod.

[BANDITROD]

steel mate and cheers i will wear it with pride lol

[wackyrider]

Looks great Rod. Nicely done

[Pab13]

Good stuff Rod, I know it wont scrub I had an XS1100 and an old Z650 on your old trailer and had no trouble

[KATO ZX7]

Good work Rod, nice trailer Kev!

[Large]

I fitted a stretched ZX12R and a Spondon on my Dad's fully galvanised trailer all the way to queerland (via casino) and back a long time ago[^]

[BANDITROD]

i remember a pic of that somewhere it was shiny

[Fight_fan]

Very noice Rod! How does it avoid rego? Do u mexicans get away with that shit dwn there? 90% sure all trailers need to be rego'd in NSW :( I should really move south...

[Redmohawk]

Basicly if its under car length and width , and isn't a caravan or boat trailer single axle is doesn't need rego just lights. If it blocks the view of your cars number plate it needs something to show the cars plate number.

[Docktor]

dont stress trailer rego is about 50 bucks, need a compliance plate ya can buy from a trailer parts place and keep it under 3 metres long, the car width is a bit of a balls up coz if ya lend it to a mate with a laser he will get done for unregistered. Toss it behing a cruiser and ur sweet. I would rather move to queensland and pay for my trailers rego.

[El_Hefty]

Sweet trailer Rod i would love to build shit like that... im just too fucking lazy

[BANDITROD]

this one is for kev and i am about to start building a fully enclosed one for myself but that will be a slow project

[rock hard]

Love your work big fella

[BANDITROD]

cheers guys