Teflon coating in melbourne?

[80s freak]

As it says, I'm looking for someone that does Teflon coating preferably in the melbourne south east area. Cheers

[boris]

did you burn the eggs in the frypan jesus I hate when I do that never done it that bad though

[80s freak]

Nope, on Mr turbos advice I want to get the piston inside the wastegate teflon coated as the early series don't run any form of diaphram or seal. Coating them was the best way to get a smoother and better sealing action.

[stu]

Maybe contact this mob Geoff.
http://www.electromold.com.au/index.cfm/contact_us
202 Holt Parade
Thomastown VIC 3074

Telephone (03) 9464 0922
Fax (03) 9464 0548

[stu]

And check this page.
http://www.electromold.com.au/index.cfm/products/nickel_teflon_nico_ptfe.html

[Booster]

Or talk to HPC, there wettable matrix may do similar, certainly looks and feels like teflon

[BANDITROD]

electromould are a fucking pricey mate

[80s freak]

Thanks Banditrod,have heard that, it's only a small part so hopefully it won't be to bad.

[Super_Chook]

These guys seem to do a good job although their northern suburbs

Australian Surface Treatments Pty Ltd
Address: 40 Killara Rd, Campbellfield, VIC, 3061
Phone number: (03) 93570297
URL: http://www.ast.au.com

[Gitzy]

LOL go the plug mate, do you work there??

[scotty]

quote:Originally posted by BANDITROD

electromould are a fucking pricey mate
ha? i had me bore done on the yz, bored to 286 cc, coated and piston & rings supplied with gaskets, $670, all up.....

[BANDITROD]

before i knew any better they charged me $500 just to polish a swingarm now i know better i wont go back there again

[80s freak]

Spoke to Anthony from Electromold the other day. He was very helpful, freely gave advice. Asked me alot of questions about what I wanted done. Then gave me a few things to find out before he will say if the coating setup he uses would be correct or not. Nothing mentioned about price as treatment proceedure isn't finalised yet. I was very happy with his up front attitude and what appeared to be a genuine interest in what I was doing and making sure he gave me accurate info. Which brings me to my next question. I need to know approximate max temp of the piston inside a waste gate mounted in the elephant dick pipe on a mr turbo draw through gsx1100 running about 8-10psi? Any help would be great.