Page 5 of 5 FirstFirst ... 345
Results 81 to 90 of 90

Thread: Damo's ZX10R

  1. #81
    Pizza delivery boy/girl
    Join Date
    Aug 2011
    Location
    Perth
    Posts
    69
    haha lack of wind protection is a sacrifice i'm willing to live with

    Got the steering damper fitted and shes back on the road, now to beef up the belly pan mounts

  2. #82
    Pizza delivery boy/girl
    Join Date
    Aug 2011
    Location
    Perth
    Posts
    69
    so finally got the damper mounted, kinda, was the best idea i could come up with at the moment, any suggestions??

    its functional, not the prettiest looking setup, definitely needs to be blacked out
    Attached Thumbnails Attached Thumbnails 69743886_2734806316549880_2615455386127302656_n.jpg  

  3. #83
    Would dropping the forks 10mm and putting it above the clamp help? I know it’ll change rake and trail...
    Else the way it is on mine (er6, yes i know not even similar but i have z1 forks )I use a z1000 top clamp and an eBay mount kit
    Click image for larger version. 

Name:	418F4344-6553-46D8-9F6A-29953370C3D7.jpg 
Views:	2 
Size:	20.4 KB 
ID:	8471
    Last edited by Auser6guy; 04-10-2019 at 05:20 AM.

  4. #84
    Else there’s top triples with the mount integrated. I’m yet to see one with bar clamps but they can be had fairly cheap...
    As an example this ones for a 6er but might fit
    https://rover.ebay.com/rover/0/0/0?m...2F401730898889
    Has the added benefit of removable ignition mount

    Downside, made from chinesium.... for 50 bucks how good could it really be ?
    Last edited by Auser6guy; 04-10-2019 at 06:05 AM.

  5. #85
    Pizza delivery boy/girl
    Join Date
    Aug 2011
    Location
    Perth
    Posts
    69
    If i drop the forks the top of them would hit the bars, i spose i could chuck some spacers in there and raise the bars higher to allow for that, i used the original mount for it that bolted under the top triple but it sat on the piss when he bars were straight which fucking drove me crazy

    that one on yours looks like a mini pillion peg bracket haha

    cheers for he ideas, something to think about

  6. #86
    My z1000 forks sit 30mm above the triple and i used risers on my clamp to clear them

    i had to then get even lower bars and i really liked how drag bars felt as they have no rise but normal sweep and generally are nice and wide(800mm!) ive since gone for clip ons for a more aggressive look( im also going with better and fatter zx10 forks as well) so youre welcome to the bar for the price of postage.Or else you can order on eBay for like 30 bucks delivered.. these ones are closer to standard width but theres wider ones as well
    https://www.ebay.com.au/itm/7-8-22mm...-/183924803637
    Attached Thumbnails Attached Thumbnails 376E26D9-3AF6-4EA2-9513-437C4C18E8C5.jpg  
    Last edited by Auser6guy; 09-10-2019 at 07:14 PM.

  7. #87
    Now that you mentioned that it looks like a pillion bracket i cant unsee that hahah!

  8. #88
    Pizza delivery boy/girl
    Join Date
    Aug 2011
    Location
    Perth
    Posts
    69
    hahaha sorry mate, cheers for the offer but i should be good for the bars, the bend on mine aren't too aggressive and i reckon a combination of spacer under the risers, winding down the pre-load a bit and maybe milling a couple mill off of the fork bracket i could probably get it to fit above the top triple .

  9. #89
    Hi mate, do you still have the stock bracket for the damper that fits under the top triple and are you willing to part with it for not a lot of money? I can swap my mini pillion peg bracket if that helps?

    Reason being I put zx10 forks on my bike recently(with clip ons) and now my old set up sits to high

  10. #90
    Pizza delivery boy/girl
    Join Date
    Aug 2011
    Location
    Perth
    Posts
    69
    Shit i have only just seen that last post, my apologies. I think i still have it in my box of bits but i chopped it up at the start trying to fit the damper

Page 5 of 5 FirstFirst ... 345

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •