Here are Andy check this link for your wheel swap!
http://gpzrear.blogspot.com.au/
Thats a good site.
Im leaving mine as stock as possible. Just got a set of Dunlop GT501's which are good tires for a geep.
Just need my new system and a slight re jet and im laughing.
A few updates,
Repaired all the body work and repainted the top of the tank and all the front fairings.
New shorter Termi can.
Fitted my bar end mirrors to clean up the front more , and a few other bits here there and everywhere.
Mate that's one clean looking gpz, good job
Cheers Matt
I hate being bipolar, its awesome!
thx mate
"The" bike to have when I was a kid. Still looks good today. Nice one Damo.
cheers Si
im still looking for the cover mate sorry its been a busy week been on call and that i havent forgotton
Righto bit of an up date.
After Kev got me onto unicorn and a zx9 complete front end it was time for the resto mod to continue.
The front end was shipped and arrived from vic.
A quick inspection all seemed fine , I cleaned it up and ripped the triples off for a stem swap with the original gpz unit.
Off to me trusty mate Exben for this little mod, he also trimmed off the zx9 lock stops and drilled tapped and added bolts and spacers for the new ones.
A spacer was needed for the top triple as well to space and well and the triple and also take the smaller stem.
A day later I had the triples back and was ready for action and 4 hrs in the garage.
last but not least put it all back together and test ride.
I still need to pull the front wheel and repaint it , and repair and paint the front guard.
Other then that it was a pretty straight forward swap and a much improved ride and feel to the bike.
The bike looks tough as.
Ill get some better images up once I get it outside in the day light.
Let me know your thoughts, always open to both positive and negative feedback.
cheers damo