-
Power Hungry, Law Disregarder
Contributing is good...do that.
Your a cock....
Oldschool is not a cock...he is a sloppy well used vagina that represents a wizards sleeve that oozes all sorts of dribble.
-
ASF Standard Full Member
Make my own kit , need to plate a single air cooled cylinder and liner. Don't care about colour/look and will avoid something that looks pritty at all costs. Purely a heat transferance/anti rust deal. Bike will be on the salt flats flat out for 7 min a few times. Was thinking copper plating But I read its tricky to get it to stick to cast iron.
-
Yes it is tricky, as anti corrosion goes you should consider zinc playing, not sure how it would go with hear transfer tho, but don't think it will retain hear. Zinc when plated is a silvery colour, to get the Goldy colour from it, it is immersed in a dye.
But remember that zinc is a sacrificial coating, meaning that it will corrode before the base metal, often leaving a whitish powder not unlike battery acid....
-
Bloke with the stick
Hey Convert, welcome aboard mate.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules