Page 2 of 7 FirstFirst 1234 ... LastLast
Results 21 to 40 of 127

Thread: Resto project GT380

  1. #21
    Weekend Warrior
    Join Date
    Jun 2010
    Location
    Qld Police State
    Posts
    429
    I wonder what the differences were between the GT380 and the GT550 motors. It might be only bigger barrels and pistons on the same bottom end. The Japs did a lot of that in the 70s, even Ducati did it with the 250/350/450 Desmo.

  2. #22
    Aussie Streetfighter Hooligan
    Join Date
    Nov 2006
    Location
    gunnedah nsw
    Posts
    8,871
    im pretty sure the 550 s bottom end is bigger physically plus it had a starter motor mounted under the engine and the 380 has asix speed box 550 has 5 speed
    the good thing tho is that all the triple suzys use piston sizes similar to the singles
    hence the weird capacitys ie 380 being 3 125s and 550 being 3 185s so the later TS pistons should fit up to the water cooled era GT 250 pistons fit a 380 also

  3. #23
    RevHead
    Guest
    Quote Originally Posted by Jockney Rebel View Post
    oh btw ts125 piston s should fit
    clever bugger ,on my 550gt i fitted a stinger 3 into 1 zorst ,and a set of pods it was great fun
    the 380 was a great bike but still alump to chuck around,they really turn heads,

  4. #24
    Aussie Streetfighter Hooligan
    Join Date
    Nov 2006
    Location
    gunnedah nsw
    Posts
    8,871
    ...oh and if you are handy with a mill you can fit reed valve blocks and enjoy much more torque better fuel economy plus a reasonable increase in power ..mated with a decent set of period Allspeed spannies and some mild porting she'll likely see about 40hp+

  5. #25
    ASF Standard Full Member
    Join Date
    Dec 2008
    Location
    Bangalore, Victoria, India.
    Posts
    1,204
    Ok. Donk is on the bench for cleaning and stripping. There is some SERIOUS shit collected under the carbs and airbox. I took off the oil pump and oil line covers to have a look about. This is one dirty girl !!

    :cool: Oblivious !!

  6. #26
    Tyre destroying, mad bastard menace
    Join Date
    Feb 2008
    Location
    Melbourne, , Australia.
    Posts
    1,063
    Yeuk. When you're ready mate give me a call and I'll give yer crabs the U/S treatment if you want

  7. #27
    Tyre destroying, mad bastard menace
    Join Date
    Feb 2008
    Location
    Melbourne, , Australia.
    Posts
    1,063
    and other engine bits and pieces....gearbox, barrels, crank, clutch, etc

  8. #28
    ASF Standard Full Member
    Join Date
    Dec 2008
    Location
    Bangalore, Victoria, India.
    Posts
    1,204
    Sounds good to me Simon old boy. The carbs are propper gopping and will need a full rebuild and new jets etc. Was thinking of soda blasting the barrels. do you think the U/S would be as good or better?
    :cool: Oblivious !!

  9. #29
    Tyre destroying, mad bastard menace
    Join Date
    Feb 2008
    Location
    Melbourne, , Australia.
    Posts
    1,063
    I've just glass bead blasted my RS flatties and they've come up great. U/S cleaning doesn't necessarily make them beautiful but it does make them clean,IE the U/S cleaning doesn't necessarily remove rust, oxidation or imperfections but the glass bead blasting will do most of that.
    I'm going to put my carbs back into the U/S cleaner to make sure any errant glass bead is cleaned out





  10. #30
    ASF Standard Full Member
    Join Date
    Dec 2008
    Location
    Bangalore, Victoria, India.
    Posts
    1,204
    Okie Dokie, I'll blast them then bring them to your house with a couple of bottles and we can shoot the shit while the cleaner does its thing.
    :cool: Oblivious !!

  11. #31
    Tyre destroying, mad bastard menace
    Join Date
    Feb 2008
    Location
    Melbourne, , Australia.
    Posts
    1,063
    Sounds good to me matey

  12. #32
    Tyre destroying, mad bastard menace
    Join Date
    Apr 2007
    Location
    Usa
    Posts
    4,858
    Blog Entries
    1
    vapor blasting is where its at boys and girls :-)

  13. #33
    Aussie Streetfighter Hooligan
    Join Date
    Nov 2006
    Location
    gunnedah nsw
    Posts
    8,871
    Cant wait to hear that triple burble nice one

  14. #34
    ASF Standard Full Member
    Join Date
    Dec 2008
    Location
    Bangalore, Victoria, India.
    Posts
    1,204
    Most of the small fuel / oil lines are pretty much stuffed, gone brittle over time. Anyone know where I can get some generic tubing to replce them, (Jimmi), without having to track down some OEM stuff from Suzuki?

    Note: Maybe I should have measured them before asking stoopid questions, probably readily available.
    :cool: Oblivious !!

  15. #35
    Tyre destroying, mad bastard menace
    Join Date
    Feb 2008
    Location
    Melbourne, , Australia.
    Posts
    1,063
    I'm likely to be putting in an order with these lot soon http://www.allensperformance.com/index.html if you want I can get some tubing from them for you

  16. #36
    ASF Standard Full Member oldskool's Avatar
    Join Date
    May 2006
    Location
    SEAFORDONIA HIPPY KILL TEAM
    Posts
    4,022
    Let me know if you want me to strip the carbs down for you b4 cleaning.
    "I call it a Camberwell carrot as I invented it in Camberwell and it looks alot like a carrot"

  17. #37
    ASF Standard Full Member
    Join Date
    Dec 2008
    Location
    Bangalore, Victoria, India.
    Posts
    1,204
    Quote Originally Posted by oldskool View Post
    Let me know if you want me to strip the carbs down for you b4 cleaning.
    Cheer bro, will do
    :cool: Oblivious !!

  18. #38
    ASF Standard Full Member
    Join Date
    Dec 2008
    Location
    Bangalore, Victoria, India.
    Posts
    1,204
    Been cleaning about 2kg of shit from the block, sump and cooling fins. It's looking a monumental fuck load better already.

    :cool: Oblivious !!

  19. #39
    Tyre destroying, mad bastard menace
    Join Date
    Aug 2010
    Location
    melbourne, vic, Australia.
    Posts
    3,235
    wow... looks surprisingly good considering the amount of shit it was covered in.

  20. #40
    Tyre destroying, mad bastard menace
    Join Date
    Feb 2008
    Location
    Melbourne, , Australia.
    Posts
    1,063
    That wasn't shit it was preservative. Just like peat bogs

Page 2 of 7 FirstFirst 1234 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •