-
2 Attachment(s)
ZX10 Cafe Racer Build
Rather than approach this build like the last one, I have decided not to smash the bike up first but to start with a perfectly good, well proven bike.
I should also add this build has nothing to do with my talent at all - it's all via Ben at Extreme. He did an awesome job on my previous bike and so he was the obvious place to go for this one.
I wanted to get a cafe racer built. I had a great SF from a K4 GSXR and it handled so well, it's always going to be hard to top it.
And i actually like the feel of a bike with clips ons. So a cafe racer was a good alternative. Originally I wanted to buy an old 999 and but that meant not enough cash for the build. So i'm taking my current bike and using that. And then I'll work another bike just for the track.
This is the last time it was seen with it's kit on and then Ben quickly got rid of a sizeable 17kgs
Attachment 2955
There's quite of bit of custom stuff to build now that it's been pulled apart but the end game is to have something along the lines of this..
Attachment 2956
-
I'll bet it comes back with a turbo :)
-
yeah i reckon your right ivan
-
Nice one Dave. A Cafe racer looking bike with that sort of power will mess with quite a few heads.
-
Love the cafe look. A bit hard to do with modern type of frame :( but the 3rd pic looks great !
-
-
Its gonna look great when its done mate.
-
yup im with Ivan and Rod on this itl get boosted,
-
3 Attachment(s)
So stuff is starting to arrive and get made and whilst it's not on the bike yet, you get an idea for where it's going
Bens going to get rid of the stock top clamp and build a new one probably something like this:
Attachment 3122
And then a similar dash but in black will drop in to replace the pretty ugly and heavy set up that's sits in it right now:
Attachment 3123
The seat is being made in carbon fibre and will look the same style as this;
Attachment 3124
It's being made now(ish). I hope so anyway. The dude speaks spanish so I assume he said he'll finish it in Jan. If nothing happens I know that what he said actually means, 'fuck yourself, it'll be ready when i am'
There's some other bits on the way - new clip ons, engine guards and carbon fibre bits so I'll get up once they get here.
-
Ill be very intrested in what you think of that moto gadet clock
I am looking very hard at same one but taco
-
1 Attachment(s)
Santa got the postman to get his arse in gear and suddenly everything has started turning up.
Seat unit is here. It's a little bit rough in spots but it the right shape. Just need to now work out of the old sub frame can be made to fit or that has to be changed too.
Attachment 3294
This will get painted along with the tank so it's not too much of an issue that it has the odd spot on it.
Got to pull the rest of the stuff out of boxes later and i'll stick it all up. Then off to Ben's on Sat to get some pictures of where it's all at.
-
1 Attachment(s)
And because i am getting what was a perfectly good track tool chopped up, i got hold of this last week to replace it. It's got rego til April and then once that's up, I'll just get race glass for it and keep it for track days. First one os Sunday providing the rain stays away
Attachment 3295
-
-
-
1 Attachment(s)
Had a catch up with Ben at the weekend as a bucket load of stuff has arrived - clips ons, new levers, rear sets, carbon guards front and back, engine casing etc and the seat unit.
The actual arse end that will make it look like a cafe racer is from a site that makes after market stuff for Ducatis. So the profile is perfect but it's too skinny by far. So It's being cut in half and widened so it'll fit the new subrame
Attachment 3324
-
2 Attachment(s)
Even with the widening though, the old subframe just looks nasty. It looks like a couple of RSJ's hanging out the back once it stripped back. So Ben's making a custom sub-frame for it that'll look something like this
Attachment 3325Attachment 3326
You can see that the new hugger is too big once you get the arse end on. So that's going to be cut back too so it finishes shorter than the tail unit. Need to work out what the lights and hanger will look like but I'll probably get a new number plate.
I'm not a fan of personalized plates only because they seem too easy to remember for anyone who clocks you doing something you shouldn't be. But i figure once this is finished it'll be pretty unique so it doesn't matter. So I will change it for less letters and numbers so the width of the plate is less.
-
1 Attachment(s)
Still stuck on how to finish it all off. The original idea was to have the whole thing orange with a carbon fibre GT set of stripes running a little off centre from front to back. The guards will be carbon fibre and anything else will be black or silver.
Closest colour I could find that suited was this as the orange is a bit deeper;
Attachment 3327
But I'd forgotten that the ZX10 came in an orange anyway. So it might end up looking just like a standard 10 after all the paint work. As Large pointed out, he's got an orange one anyway so he'll just chuck a cafe racer seta on it and say they are the same bike.
So might start again on that but either way it'll be bright
-
-
-
Looking good Dave. The Radical seat unit has been used on a Ducati ST2 in the latest Motorcycle News. It does look a bit small.