-
ZX10 injectors
Has anybody got 4 standard ZX10 early model injectors laying around collecting dust I can buy?
Any model will do, I want to adapt and try them in the Z1 to see if it gets rid of the accelerator enrichment problem I'm having.
Cheers
Mark.
Last edited by Supercharger_Mark; 31-03-2015 at 10:50 PM.
-
Bloke with the stick
I prefer it as it is; I can just about keep up with you.
By the way, don't you hate it when you get excited that there is a reply with maybe some injectors and it's just me being a dick?
-
Thanks Si. I was so overwhelmed buy the response I brought some off Ebay
-
Bloke with the stick
-
-
Tyre destroying, mad bastard menace
Did you end up using the micro squirt unit mark?
-
Bloke with the stick
-
No not yet
Still waiting for the pig tails so I can finish the wiring.
Who can guess what I used to make the fuel rail?
Yes Ozzy, Just changed the injectors, got rid of the 2nd tank and plumbed the return straight to the main tank.
-
Bloke with the stick
You should be a plumber mate!
....oh, and is it finished yet?
-
Tyre destroying, mad bastard menace
Oh snap silver solder and copper so much win......
Whole thing is so much win
-
Tyre destroying, mad bastard menace
Do you find much diffrence with the injection over carbs ?
-
Bloke with the stick
-
Not yet Si.
The injection feels a lot smoother, can't tell if it goes any harder, hard to tell, feels about the same at full throttle.
-
Tyre destroying, mad bastard menace
Nice and don't worry that can always be reminded lol
I have always wanted to have a go at the micro squirt looks a top unit
-
Power Hungry, Law Disregarder
Ha ha Luv that fuel rail Mark. Bloody tops ;-)
-
Power Hungry, Law Disregarder
Come on Mark, surely there can't be anything wrong with those 30 year old injectors!!!! Lol
Is the problem sorted out ?
-
Bloke with the stick
Yea, Dave's got a point. ........Is it finished yet?
-
Yes Yes Yes, its not easy being a tight arse you know, its quite a challenge.
No not finished yet Si but on Wednesday, I did make a make shift harness for the injectors (till I get the real thing) and went for a ride, it feels pretty good, very smooth at low speed, I need to get up in the hills and play with the accelerator enrichment to see if it has solved the problem I had, however I have created a new problem which I should have foreseen, when I brake heavily with less than a 3/4 tank full, the fuel rushes forward and exposes the fuel outlet and bingo, no fuel pressure, shit, so other than baffles in the tank, anyone got any suggestions?
-
Tyre destroying, mad bastard menace
-
Power Hungry, Law Disregarder
Longer hose between tank and pump?I probably have about a metre of 1/2" bore rubberpipe in a loop under the tank to the pump and it will run the tank virtually dry without any running issues.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules