$8.38US (plus postage) and delivered in 10 days....
http://cgi.ebay.com/ebaymotors/FRAME...mZ360071135792
$8.38US (plus postage) and delivered in 10 days....
http://cgi.ebay.com/ebaymotors/FRAME...mZ360071135792
Unreal price. Whats the bolt quality like? It'd be a mongrel if they snapped during a fall.
Just buy whatever quality you want.quote:Originally posted by skb954
Unreal price. Whats the bolt quality like? It'd be a mongrel if they snapped during a fall.
it says postage is $30 US - is that right?
he needs to use a sharp, large radius tool to do that large diameter
do you lucky honda pricks get regular pitch bolts? the fine pitch gr12.8 bolts were the most exxy part of the ones i was making![]()
Rev the fucker!!!!!
im sticking with me oggy knobs... i know they will withstand a 1300 with a full tank of fuel sliding on them and not bend the bolt
did that dent the frame a lil tho on the 1300?
oggys normally go straight into the engine from what i have seen
the no-cuts are the shite ones that stuff frames
oh, and oggys bend if u slam down hard
the ones i was making (fimpKNOBS tm) had gr12.9 bolts and they bend on a few peoples bikes
Rev the fucker!!!!!
you only get what you pay for lads
I dropped my XJR1300 on one of them pretty hard and shot it down the road.quote:Originally posted by fimpBIKES
oggys normally go straight into the engine from what i have seen
the no-cuts are the shite ones that stuff frames
oh, and oggys bend if u slam down hard
the ones i was making (fimpKNOBS tm) had gr12.9 bolts and they bend on a few peoples bikes
Held up fine
i've got rg-racing ones from england. no bending, no frame damage, no digging in. it just wore down the black stuff. good gear i reckon.
what do you make yours out of fimp if you don't mind me asking I have to make some for my 95 gixxer 1100 cos I've never seen any for oldschool gixxers I was gonna use nylon like I use for my body lifts on fourbys
use something harder
i used acetal (brand name is "delrin" but just buy the acetal)
its harder, so will slide better and not grip
plus its meant for machining![]()
Rev the fucker!!!!!
thnx bloke will ring the plastics factory tomorrow and see if they stock it sometimes it sux having an older bike but I like playing on the lathe so will surely make something