Results 1 to 2 of 2

Thread: 1127 into 86 frame gsxr

  1. #1
    New to Streetfighters
    Join Date
    Jul 2012
    Location
    Wagga Wagga, nsw
    Posts
    1

    1127 into 86 frame gsxr

    Hi all, I need some advice/ expertise.
    I have fitted a 1100w engine into my 1986 frame, all is well except it won’t go. The engine was running in other bike.it all seems well, fuel and spark good. I am trying to get the right firing order. Microfiche for 92 says 1243 but then has a photo of coil lead placement that shows 1423.
    Sitting on bike looking at Coils with h/t leads facing back of bike wires left coil orange/black, white. Right coil orange/black, black/white. All of the wiring and cdi is 1986. Backfiring (loud). Any advice photos would be greatly appreciated.

  2. #2
    Bloke with the stick Gix11's Avatar
    Join Date
    Jun 2003
    Location
    Gold Coast, Queensland, Australia
    Posts
    17,574
    Blog Entries
    34
    Aha, this old chestnut again. I tried searching for the old topics as I know this came up a few times over the years, but now I can't find it.

    I just checked an '86 wiring diagram and it shows the firing as 1432, have you tried that?

    Oh, and welcome aboard mate.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •