Results 1 to 4 of 4

Thread: Gsxr1100 with Honda vfr750 single sided

  1. #1

    Gsxr1100 with Honda vfr750 single sided

    Hi I'm fitting a Honda Vfr750 single sided swinging arm to my Gsxr1100L.
    Need help and advice and I've been told this is the forum that knows .
    How did you get over the fact that the Honda VFR pivot adjuster is on opposite side to GSXR ?
    Also how did you get over the shock being slightly misaligned to the GSXR frame mount.
    Lastly any probs with chain alignment ?

    Thanks
    Pete

  2. #2
    Power Hungry, Law Disregarder
    Join Date
    Feb 2007
    Location
    Brizvegas.
    Posts
    521
    Grinder and a welder.

  3. #3
    Aussie Streetfighter Hooligan
    Join Date
    Feb 2006
    Location
    At home or at work or somewhere else
    Posts
    5,139
    You need the swinger with the pivot on the bottom, its an easy fit with just a couple of spacers

  4. #4
    Aussie Streetfighter Hooligan
    Join Date
    Feb 2006
    Location
    At home or at work or somewhere else
    Posts
    5,139
    Sorry, putting the skids down... You need the swinger with with the linkage pivot on the bottom or cut and weld the one you have. The swingarm will slip straight into the frame and you'll just need a couple of spacers to get it right.. I used an 800 sssa and offset the shock to the left or right.. There has been a lot of beer consumption since then

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •