-
Gsxr1100 with Honda vfr750 single sided
Hi I'm fitting a Honda Vfr750 single sided swinging arm to my Gsxr1100L.
Need help and advice and I've been told this is the forum that knows .
How did you get over the fact that the Honda VFR pivot adjuster is on opposite side to GSXR ?
Also how did you get over the shock being slightly misaligned to the GSXR frame mount.
Lastly any probs with chain alignment ?
Thanks
Pete
-
Power Hungry, Law Disregarder
-
Aussie Streetfighter Hooligan
You need the swinger with the pivot on the bottom, its an easy fit with just a couple of spacers
-
Aussie Streetfighter Hooligan
Sorry, putting the skids down... You need the swinger with with the linkage pivot on the bottom or cut and weld the one you have. The swingarm will slip straight into the frame and you'll just need a couple of spacers to get it right.. I used an 800 sssa and offset the shock to the left or right.. There has been a lot of beer consumption since then
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules