Ok. My gs isnt running on one cylinder. Has spark and i assume fuel cause the plug is wet. But no fire. Any thing i can do before i crack the shits and send it to someone?
Ok. My gs isnt running on one cylinder. Has spark and i assume fuel cause the plug is wet. But no fire. Any thing i can do before i crack the shits and send it to someone?
Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."
How's the timing on the trigger wheel for spark work mate? Maybe that is off wack and could be the cause. Also check the spark plug leads are on the correct cylinders.
Monster GSXR 7/11 RIP!
Raven R1 Demon.
K7 750 German Style (under construction)
It seem to be set at the stock setting. Should it be advanced or retarded for pods and dyno jett? ( tehehe retarded)
Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."
Surely test one would be to swap them over and try running it quickly. If you only run it for a few seconds it shouldn't do any harm? well, if they are already on the wrong sides you can't do much worse. Did you keep a photo or drawing of which lead went to which during disassembly?
One coil per cylinder. It was left to left and right to right
Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."
1 + 4 = pair
2 + 3 + pair
1 is left side of bike sat on and rest are numbered 2 3 & 4 to right.
assuming it's normal Japper!
Twin cylinder mate. But got it running now. Stubbled my way threw trial and error. Cheers for the pointers guys
Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."