Results 1 to 7 of 7

Thread: Running problem

  1. #1
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343

    Running problem

    Ok. My gs isnt running on one cylinder. Has spark and i assume fuel cause the plug is wet. But no fire. Any thing i can do before i crack the shits and send it to someone?
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  2. #2
    ASF Premium Full Member LKC73's Avatar
    Join Date
    Nov 2007
    Location
    Sydney, NSW, Australia.
    Posts
    1,507
    How's the timing on the trigger wheel for spark work mate? Maybe that is off wack and could be the cause. Also check the spark plug leads are on the correct cylinders.
    Monster GSXR 7/11 RIP!
    Raven R1 Demon.
    K7 750 German Style (under construction)

  3. #3
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    It seem to be set at the stock setting. Should it be advanced or retarded for pods and dyno jett? ( tehehe retarded)
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  4. #4
    Bloke with the stick Gix11's Avatar
    Join Date
    Jun 2003
    Location
    Gold Coast, Queensland, Australia
    Posts
    17,574
    Blog Entries
    34
    Surely test one would be to swap them over and try running it quickly. If you only run it for a few seconds it shouldn't do any harm? well, if they are already on the wrong sides you can't do much worse. Did you keep a photo or drawing of which lead went to which during disassembly?

  5. #5
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    One coil per cylinder. It was left to left and right to right
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  6. #6
    ASF Premium Full Member
    Join Date
    Feb 2007
    Location
    Australia
    Posts
    2,352
    1 + 4 = pair
    2 + 3 + pair

    1 is left side of bike sat on and rest are numbered 2 3 & 4 to right.

    assuming it's normal Japper!

  7. #7
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    Twin cylinder mate. But got it running now. Stubbled my way threw trial and error. Cheers for the pointers guys
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •