Clutch kit suppliers

[BOBBY]

Hey guys
Need a clutch kit for my cbr. Anyone know of a reputable company within oz that can supply a complete kit?
I've found heaps on eBay but after a few google searches the sellers look like they'll give me the run around.
Plus I'd rather my cash stay here a bit longer.

Cheers

Rob

[hyofighter]

Balistic racing sorted me for the trench wench but there more into drag stuff but he might be able to help ya out and there great to deal with

[BOBBY]

Thanks man

[Yella]

Yep I run http://ballisticperformanceparts.com/ in both the turbo and the drag bike

[BOBBY]

Cheers fellas.
I checked their site but nothing comes up.
I've flipped them an email so hopefully something pops up.

[BOBBY]

Spoke to rob via email. He reckons I won't need steel plates. I was of the understanding that they would be worn also and I won't get the true stack height by just using fibres.

What do you guys reckon?
The bike has done nearly 90k km's

[hyofighter]

i only put in fibres and it was fine , did the same on the vfr as well only i gave the surfaces of the steels a clean up

[whale]

When I did the 1170 upgrade to my Harris it overpowered the standard clutch

I spoke to Rob at Ballistic and he advised the same, he supplied a new fibre pack and standard springs for a perfect result

[rod185651]

As others have said Rob at Ballistic is your man, good advice and good service

[Yella]

Haven't done steels in years only do the fibres, I only change the steel if they are warped or severely worn.

[BOBBY]

I'll give the fibres a go. I think mine are just glazed over.
I was just concerned about the stack height.

[Yella]

You can make up the stack height with different thickness fibres if required