+ Reply to Thread
Results 1 to 18 of 18

Thread: I got a toy :D

  1. #1
    ASF Basic Full Member
    Join Date
    Aug 2010
    Location
    melbourne, vic, Australia.
    Posts
    3,246

    I got a toy :D

    So my uncle called me up the other day to see if i wanted to let me know he was having a shed clean out and he thought i might want some stuff... he was right.

    here's the main little toy that i got off him:


    Plans with this are to swap it to a 3 phase motor controlled by a little 1-3phase thingo (also from my uncle) that lets you control RPM and ramp up/down speed and whatnot. Convert a better top slide, with 4 position tool post to fit (again, from my uncle) and then add some sort of scales on the main and cross slides (they have nothing right now.) I would like to add a DRO but they seem to be a bit pricey at this stage.

    I also got a dial indicator, some 2 and 3 jaw pullers and an Oxy set.

    All in all a pretty good little haul i think

    Oh and a 3.23 XY LSD. putting the center in a disk brake rear end i have already for my ute.
    MY RSV1000
    http://www.streetfighters.com.au/forum/showthread.php?14066-T-Bike!&p=373990&viewfull=1#post373990

  2. #2
    ASF Premium Full Member fimpBIKES's Avatar
    Join Date
    Aug 2005
    Location
    Hunter Reg NSW, Australia.
    Posts
    6,569
    not a bad days work!
    Rev the fucker!!!!!

  3. #3
    ASF Basic Full Member
    Join Date
    Feb 2007
    Location
    Brizvegas.
    Posts
    520
    Re: scales on the slides - get some cheap digital calipers and bolt them in place to get a nice digital readout

    XY LSD - I assume it's a borgy? if so - just a heads up, they're only 24 spline and 2 pinion - I grenaded one badly and twisted up both axles (tore the splinjes out of the cone clutches) a few years back without trying to hard...

  4. #4
    ASF Gold Full Member
    Join Date
    Apr 2007
    Location
    ipswich qld Australia.
    Posts
    4,624
    Blog Entries
    1
    hare and forbes sell the same thing as digy caliper but for the job
    cheep and narsty but will do the goods for under 100 for both x/y, ill be retro fitting one to the spindle of the mill
    I am very proud of my race....the fucking human race...........

  5. #5
    ASF Basic Full Member
    Join Date
    Aug 2010
    Location
    melbourne, vic, Australia.
    Posts
    3,246
    Quote Originally Posted by GammaBoy View Post
    Re: scales on the slides - get some cheap digital calipers and bolt them in place to get a nice digital readout

    XY LSD - I assume it's a borgy? if so - just a heads up, they're only 24 spline and 2 pinion - I grenaded one badly and twisted up both axles (tore the splinjes out of the cone clutches) a few years back without trying to hard...
    Thanks for the tips guys.

    The LSD is just a borgy and it's 25 spline. I doubt i'll break it. i've only got a pretty much stock 351... i might break it when i put the mild cam and the done up c9 with 2500 stally though :P

    Not to worry, it's still an upgrade from the 2.92 single spinner drum brake rear in there right now (i've put the 3.23 lsd center into an XC length disk diff)
    MY RSV1000
    http://www.streetfighters.com.au/forum/showthread.php?14066-T-Bike!&p=373990&viewfull=1#post373990

  6. #6
    ASF Basic Full Member
    Join Date
    Feb 2007
    Location
    Brizvegas.
    Posts
    520
    Quote Originally Posted by ozzy1100 View Post
    hare and forbes sell the same thing as digy caliper but for the job
    cheep and narsty but will do the goods for under 100 for both x/y, ill be retro fitting one to the spindle of the mill
    Interesting - I might go have a look-see. I was just going to use the calipers for the compound, and was going to get a proper DRO out of ebay/china/alibaba for the main feed and cross head.
    My compound head doesn't have a degree scale on it - are there any neat tricks out there for sorting that?
    Quote Originally Posted by xa-mont View Post
    Thanks for the tips guys.

    The LSD is just a borgy and it's 25 spline. I doubt i'll break it. i've only got a pretty much stock 351... i might break it when i put the mild cam and the done up c9 with 2500 stally though :P

    Not to worry, it's still an upgrade from the 2.92 single spinner drum brake rear in there right now (i've put the 3.23 lsd center into an XC length disk diff)
    Bizzarly, the 3.23 LSD lasted less time than the 2.92 open wheeler I had before it... but with the auto you'll definitly make it live longer than with a toploader. Just keep an eye out for putting one rear wheel across a manhole cover under power - the slip/grip shock load is what killed mine in the end.

  7. #7
    ASF Basic Full Member
    Join Date
    Aug 2010
    Location
    melbourne, vic, Australia.
    Posts
    3,246
    Lol. I'll watch out for that. I don't think my. 275 rear tyres will help its life span :-P
    MY RSV1000
    http://www.streetfighters.com.au/forum/showthread.php?14066-T-Bike!&p=373990&viewfull=1#post373990

  8. #8
    ASF Gold Full Member
    Join Date
    Apr 2007
    Location
    ipswich qld Australia.
    Posts
    4,624
    Blog Entries
    1
    Quote Originally Posted by GammaBoy View Post
    Interesting - I might go have a look-see. I was just going to use the calipers for the compound, and was going to get a proper DRO out of ebay/china/alibaba for the main feed and cross head.
    My compound head doesn't have a degree scale on it - are there any neat tricks out there for sorting that?

    Bizzarly, the 3.23 LSD lasted less time than the 2.92 open wheeler I had before it... but with the auto you'll definitly make it live longer than with a toploader. Just keep an eye out for putting one rear wheel across a manhole cover under power - the slip/grip shock load is what killed mine in the end.
    The cheap ones can be had up to 600 or 900 I think , they can be used alone (read out on scale)
    But they also sell a little hub all up under 250 for 3 ax and hub.
    What type compound head you talking about ?
    I am very proud of my race....the fucking human race...........

  9. #9
    ASF Basic Full Member
    Join Date
    Feb 2007
    Location
    Brizvegas.
    Posts
    520
    Like this, but made in the 50's... lol
    I don't have the protractor markings at part 2b
    https://upload.wikimedia.org/wikiped...ask_legend.jpg

  10. #10
    ASF Gold Full Member
    Join Date
    Apr 2007
    Location
    ipswich qld Australia.
    Posts
    4,624
    Blog Entries
    1
    id take the compound off and mark a circle and divide up into common angles
    put compound back on work with dial indrcater till compond parral then just put a center pop on it where you have marked 0.
    I am very proud of my race....the fucking human race...........

  11. #11
    ASF Basic Full Member
    Join Date
    Aug 2010
    Location
    melbourne, vic, Australia.
    Posts
    3,246
    Quote Originally Posted by ozzy1100 View Post
    id take the compound off and mark a circle and divide up into common angles
    put compound back on work with dial indrcater till compond parral then just put a center pop on it where you have marked 0.
    gee you're not just a pretty face are you.
    MY RSV1000
    http://www.streetfighters.com.au/forum/showthread.php?14066-T-Bike!&p=373990&viewfull=1#post373990

  12. #12
    ASF Gold Full Member
    Join Date
    Apr 2007
    Location
    ipswich qld Australia.
    Posts
    4,624
    Blog Entries
    1
    I have my moments ...your just suxing up cause you want one of my tigs lol
    I am very proud of my race....the fucking human race...........

  13. #13
    ASF Basic Full Member
    Join Date
    Aug 2010
    Location
    melbourne, vic, Australia.
    Posts
    3,246
    Give me a fucking welder you ugly cunt!!!!
    MY RSV1000
    http://www.streetfighters.com.au/forum/showthread.php?14066-T-Bike!&p=373990&viewfull=1#post373990

  14. #14
    ASF Premium Full Member wackyrider's Avatar
    Join Date
    Dec 2006
    Location
    Brisvegas
    Posts
    4,895
    Quote Originally Posted by xa-mont View Post
    gee you're not just a pretty face are you.
    Who told you he has a pretty face?? They lied....
    Live today, die tomorrow

  15. #15
    ASF Gold Full Member
    Join Date
    Apr 2007
    Location
    ipswich qld Australia.
    Posts
    4,624
    Blog Entries
    1
    mmnnn might have to leave a presant in a visiting tool box..........
    I am very proud of my race....the fucking human race...........

  16. #16
    ASF Premium Full Member wackyrider's Avatar
    Join Date
    Dec 2006
    Location
    Brisvegas
    Posts
    4,895
    oops...

    Hey Lynton oh buddy oh pal. I have the number of a horny mortitian who like being tied up...
    Live today, die tomorrow

  17. #17
    ASF Gold Full Member
    Join Date
    Apr 2007
    Location
    ipswich qld Australia.
    Posts
    4,624
    Blog Entries
    1
    Are you rubbing that in my face or passing on lol
    I am very proud of my race....the fucking human race...........

  18. #18
    ASF Gold Full Member
    Join Date
    Apr 2007
    Location
    ipswich qld Australia.
    Posts
    4,624
    Blog Entries
    1
    Quote Originally Posted by xa-mont View Post
    Give me a fucking welder you ugly cunt!!!!
    Mmmmmm 300 amps of foot controlled tig goodness yummy and all mine bwahaha mine mine mine hehe
    I am very proud of my race....the fucking human race...........

+ Reply to Thread
Untitled Document

 

HELP SUPPORT THOSE THAT SUPPORT US - CHECK OUT THESE WEBSITES........

AustraliaHurtle Gear Motorcycle Accessories AustraliaMotorcycle Tyre Warehouse100s of aftermarket parts and accessories for your motorcycle from Rated R Motorcycle Parts
Rapid Bikes Magazine available monthly throughout Australia & New ZealandEvery rider is individual so why not show your bikes individuality with a custom seat or embroided logo on your seat  in a color and design of your choice.Trooper Lus Garage for motorcycle parts, service and much moreWorld Wide Bomber Magazine, Streetfighters from around the world - ONLINE
Visit Face it graphix for all your bike stickers and helmet stickers Visit Dash Designs for all your website and design needs Advertise on ASF and get your business seen by 1000s of visitors every month Advertise on ASF and get your business seen by 1000s of visitors every month
 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts