Page 6 of 7 FirstFirst ... 4567 LastLast
Results 101 to 120 of 135

Thread: GS450 build

  1. #101
    Weekend Warrior
    Join Date
    Nov 2007
    Location
    Helidon, QLD, Australia.
    Posts
    445
    That's awesome, good luck on the ride mate.

  2. #102
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    So after dicking around around with these fuxked carvie which i found more and more problem i decided to say fuck it, and went and brought a new set. Couldnt find any gs450 carbs so got a set off a gs500. Basicly fit straight in and already jetted quiet well plus there off a running bike so basic balance and floats heights are right
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  3. #103
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    Just had to re eun rhe cable to allow for a different fit. But fits not a problem
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  4. #104
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  5. #105
    Tyre destroying, mad bastard menace
    Join Date
    Apr 2007
    Location
    ipswich qld Australia
    Posts
    4,858
    Blog Entries
    1
    Awesome bob

  6. #106
    Bloke with the stick Gix11's Avatar
    Join Date
    Jun 2003
    Location
    Gold Coast, Queensland, Australia
    Posts
    17,574
    Blog Entries
    34
    Couldn't get the video to play for some reason? But all seems ok yea? I would really recommend a run on the dyno to make sure you're in the ball park before getting stuck in to riding it mate. They could give you advice on what jets sizes would be the go as well and you could just buy a kit and fit them yourself.

  7. #107
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    Its on the card mate. Judt need more cash to keep moving along.
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  8. #108
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    Done some more but photo bucket isnt working at the moment. To it for a goos ride but it startes to smoke odd the header at idel. Doi d the stator cover was leaking so a stjp clean and re assemeble and away it went. How ever i think the front brake mite be gripping alittle. Anotjer thing ti look at this week
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  9. #109
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  10. #110
    ASF Premium Full Member LKC73's Avatar
    Join Date
    Nov 2007
    Location
    Sydney, NSW, Australia.
    Posts
    1,507
    Sounds sweet Bob, and I am sure you tidy up all the teething problems.
    Monster GSXR 7/11 RIP!
    Raven R1 Demon.
    K7 750 German Style (under construction)

  11. #111
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    Still a little bit with the front brake mate. Seem like its not releasing after ive engaged the brake. Not to sure. Still trying to nut it out when i get time
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  12. #112
    Bloke with the stick Gix11's Avatar
    Join Date
    Jun 2003
    Location
    Gold Coast, Queensland, Australia
    Posts
    17,574
    Blog Entries
    34
    Sounds like the caliper pistons are binding. Might need to take the caliper off, pull it apart and give it a service.


  13. #113
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    Took it fir a good 200km ride today. Stopped by lynnton land anf said hi. Yer Si. Mite need to do it again. Also still have a small oil leak out if the stator cover. Its alot better but still a drip
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  14. #114
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    So we heades out for a pre ride ride to check everything was ok. Ended up on rhe trailer home. Looks like the suspension came loose ans undid it self. However the tyre has a new deep groove in the middle. Most like will replace it.
    Trying this imagur since wants money and im a cheap skate.

    http://imgur.com/a/dbgqG
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  15. #115
    Tyre destroying, mad bastard menace
    Join Date
    Apr 2007
    Location
    ipswich qld Australia
    Posts
    4,858
    Blog Entries
    1
    Fuck that would have been entertaining

  16. #116
    Bloke with the stick Gix11's Avatar
    Join Date
    Jun 2003
    Location
    Gold Coast, Queensland, Australia
    Posts
    17,574
    Blog Entries
    34
    Yep, that's not good. Still better it happened there than in Glen Innes!

  17. #117
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    Srill planing on glen innes si. Couple od things to fix but its on the cards
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  18. #118
    ASF Premium Full Member LKC73's Avatar
    Join Date
    Nov 2007
    Location
    Sydney, NSW, Australia.
    Posts
    1,507
    Seems like your photofucket account is still working Bob.
    Monster GSXR 7/11 RIP!
    Raven R1 Demon.
    K7 750 German Style (under construction)

  19. #119
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    Some is. But cant upload to it.
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

  20. #120
    ASF Standard Full Member Bob's Avatar
    Join Date
    Nov 2008
    Location
    Mt Cotton, Qld, Australia.
    Posts
    2,343
    Sooo. Nearly back together. Cut some plate for the wiring to be more permanentlt mountes too.
    Cafe 19.7.17 https://imgur.com/gallery/MkIGA
    Ladies and Gentelmen, take my advise. "Pull down your pants and slide on the ice."

Page 6 of 7 FirstFirst ... 4567 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •