El duece......albi's 3rd go!!!

[ALBI]

EL DEUCE will be dealt a new hand in 2013 !!

well as some of you know on our facebook site , my old build from last yr i decided from NFR and watching YELLA have way to much fun and then SEN setting a chalange that i could not refuse,well i could have just said NO ! but there is no fun in that !!

im not content in fitting just one turbo but rather "two" turbos ,why ?? why the hell not!!
so ive been doing some moonlighting whilst off after my knee op"jury is still out if a smart move or not"

im ging to use 2 x GT1249
an m3 black box as sugested by ben.
two intercoolers !
not running any cans just right out the turbo baby yeh!!

and fighter the bike aswell!!

seems old kev didnt like the RC8 tail he got for his BUSA project this one mu little princess is on and he has gone for a different route of seat!!
his misfortune is my gain !!


and now the RC8 tail is mine
at the same time i got kev to make up a quick seat pan for basic shaping then it will get covered in some nice leather!!

my subbie will be made from the two rods you see,chrome moly tie rod bar from a speedcar,walked into pitcrew here in newy and asked if they had some 15mm-20mm chrome moly tube for sale nope !!
but after talking for a hour or so he suggested these rods he no longer sells as he uses alloy now ,they used to cost $60 each rod threaded both ends aswell got them for $30 each.

started to rip her appart.felt soooo wrong to do!!

[ALBI]

but to rip appart felt oh sooooo good.
cheers jules.

ok so here goes i personaly thought hmm why did kev buy this seat in and not use it as i was driving back to newy???

well who cares as when i sat it on the bike i got a hard on yeh!!


rip it appart i did and got the new seat on .

bugger me this thing looks the goods on there !!

all it needs is a widdle trimming and it will fit like a undersized condom on john holmes!!

plenty o room for battery and ecu!!

does my arse look big in this ??

[ALBI]

im loving this seat lol


you digging this ??



the cool thing is that the seat base is like the tank , narrow fat then narrow!



a lot o room for a nice pack o card's mural with the ace's face up!!



see wat i meen ^^^ look's like it was made for a TLS not a stinking KTM RC8 !!

[ALBI]

well the sub frame is going to be easy i have spare battery retaining bar and also seat lock and barrel.

but the tail light as indicators im not so sure on ??
going to run pollished ring front indicators of ben,but need to work out something cool for rear!!

any suggestions ????

[RevHead]

does your seat base cover the whole opening of the tail like mine.

[Yella]

Nice Albi

[Redmohawk]

well the sub frame is going to be easy i have spare battery retaining bar and also seat lock and barrel.

but the tail light as indicators im not so sure on ??
going to run pollished ring front indicators of ben,but need to work out something cool for rear!!

any suggestions ????

High brigtness 5mm LED run on edge of tail on the inside with holes drilled for light output.

[ALBI]

Yeh Pete it will do.
Cheers tells its half Ur fault this.

Red ,so you meen to fit led from inside tail and expose only heads of globes!!

[Redmohawk]

yep spot on

[RevHead]

i just made a tail tidy and hung everything off ,of that

[Bob]

Looks great Albi. Really changes the bike.

[MattyDucati]

I like where ya goin with it bloke!

[ALBI]

yep spot on

ok the only problem with that is in NSW any rear facing light needs to incoprate a reflector of same colour??

time for some web searching!!

[latheboy]

That tail looks shit, it would look awesome on my bike tho......

It fits the frame and tank really well.

How will you mount the turbos? one on either side?

[fimpBIKES]

dont think u need to worry able the reflector in light thing if u have some sort or red reflector on rear somewhere (some sticker on plate surround would do )

[Redmohawk]

ok the only problem with that is in NSW any rear facing light needs to incoprate a reflector of same colour??

time for some web searching!!

In vic its only the RED that needs a reflector , I'd check the deal bloke as clear indicators are legal in NSW (no reflector on them) so you might be in with a chance.

[Redmohawk]

dont think u need to worry able the reflector in light thing if u have some sort or red reflector on rear somewhere (some sticker on plate surround would do )

I'm using Red reflector bolts (18mm round head with red reflector looks a bit like a Dash "push to start button" ) to secure the Number plate to supply my red reflector for Vic rego inspection. Bloke doing the roady said that would be fine for a pass.

[ALBI]

That tail looks shit, it would look awesome on my bike tho......

It fits the frame and tank really well.

How will you mount the turbos? one on either side?

oh yes they will be mounted either side!!

[ALBI]

opps sorry latheboy i forgot to attach pic!!

[Big Dan]

You can do pics without Gitzy Ill have to get you to do mine