Page 36 of 43 FirstFirst ... 263435363738 ... LastLast
Results 701 to 720 of 845

Thread: Hades

  1. #701
    Power Hungry, Law Disregarder
    Join Date
    Dec 2009
    Location
    brisbane, qld, Australia.
    Posts
    506
    Looks good Surt.
    Did you just stick them in the oven above your pies for dinner, gas mark 8 for 30 minutes?

  2. #702
    ASF Gold Full Member Surt's Avatar
    Join Date
    Jan 2009
    Location
    Alice Springs, Northern Territory, Australia
    Posts
    4,562
    nah i fetched 'em to the pros at the thermists shop, 350°C and coupla hours
    wouldn't recommend your way slingy, given the fact that the most of nowdays ovens are microwave lol

  3. #703
    ASF Gold Full Member Surt's Avatar
    Join Date
    Jan 2009
    Location
    Alice Springs, Northern Territory, Australia
    Posts
    4,562
    merry kissmyass again! decorating the new years tree

    fittings for the fuel delivery and oil scavenge from turbo



    sprayed



    right from wrong - i/c additional temp sensor plug, i forgot to order one but then remembered that i had the 3/8" bungs off the fuel pump replaced by AN-6/3/8" NPT fittings, the rest is obvious







    the gap lets to slacken the hose clamp and to twist the hose a bit to eliminate its distortion







    +5 mm spaced cover and +6 mm clutch rod along with the stock one



    what do you reckon is the clutch hose routed alright? at least it doesn't interfere with steering



    any idea how to plumb the bloody nipples under the tb's?

    Last edited by Surt; 07-06-2015 at 04:20 AM.

  4. #704
    ASF Gold Full Member Surt's Avatar
    Join Date
    Jan 2009
    Location
    Alice Springs, Northern Territory, Australia
    Posts
    4,562
    bleeding the shock







    plumbing the oil cooler




  5. #705
    Tyre destroying, mad bastard menace
    Join Date
    Apr 2007
    Location
    ipswich qld Australia
    Posts
    4,858
    Blog Entries
    1
    Top work as per usual surt

  6. #706
    Power Hungry, Law Disregarder
    Join Date
    Dec 2009
    Location
    brisbane, qld, Australia.
    Posts
    506
    Great progress. Getting close to running now ;-)

  7. #707
    ASF Gold Full Member Surt's Avatar
    Join Date
    Jan 2009
    Location
    Alice Springs, Northern Territory, Australia
    Posts
    4,562
    hell yeah! thanks mates

    today bought ss hardware for the b12 and some extra


  8. #708
    ASF Gold Full Member Surt's Avatar
    Join Date
    Jan 2009
    Location
    Alice Springs, Northern Territory, Australia
    Posts
    4,562
    some lube and saw dust tin from an official wheeler


  9. #709
    ASF Gold Full Member Surt's Avatar
    Join Date
    Jan 2009
    Location
    Alice Springs, Northern Territory, Australia
    Posts
    4,562













  10. #710
    Tyre destroying, mad bastard menace
    Join Date
    Apr 2007
    Location
    ipswich qld Australia
    Posts
    4,858
    Blog Entries
    1
    Love the seat lol

  11. #711
    ASF Gold Full Member Surt's Avatar
    Join Date
    Jan 2009
    Location
    Alice Springs, Northern Territory, Australia
    Posts
    4,562
    thanks heaps mate im happy that you like it lol

  12. #712
    ASF Gold Full Member Surt's Avatar
    Join Date
    Jan 2009
    Location
    Alice Springs, Northern Territory, Australia
    Posts
    4,562
    ash nazg thrakatuluk agh burzum ishi krimpatul! one ring in the darkness bind them (and one more for spare)

    lost somewhere an original mild steel valve seat so had to make a new one from bronze


  13. #713
    ASF Gold Full Member Surt's Avatar
    Join Date
    Jan 2009
    Location
    Alice Springs, Northern Territory, Australia
    Posts
    4,562
    ground the valve to the seat



    made the afr gauge housing







    now any one knows if this bloody copper gasket comes from the oil sump? found it on the bench after the bloody sump had been installed deadly




  14. #714
    Power Hungry, Law Disregarder
    Join Date
    Dec 2009
    Location
    brisbane, qld, Australia.
    Posts
    506
    Ooohh no, done that myself before.
    Yep, that washer and an O-ring that fits on it get clamped between the sump and engine case

  15. #715
    Weekend Warrior
    Join Date
    Apr 2013
    Location
    Melbourne
    Posts
    134
    Such an awsome build ....

  16. #716
    ASF Gold Full Member Surt's Avatar
    Join Date
    Jan 2009
    Location
    Alice Springs, Northern Territory, Australia
    Posts
    4,562
    thanks heaps cicco hopefully itgunna be finished soon

    yup slingy, looked at a b12 manual and found the bllody shim. too bad that i found it a bit late but i could not find it at all. any way putting it in its place wasn't a prob, but when i started tightening up the screws, the sump scracked. wtf? it's not even located nearby the welded area and the bloody sump was annealed after the welding



    Last edited by Surt; 05-07-2015 at 07:15 AM.

  17. #717
    ASF Gold Full Member Surt's Avatar
    Join Date
    Jan 2009
    Location
    Alice Springs, Northern Territory, Australia
    Posts
    4,562
    the forged fittings are appr. 10 mm lower than the bent ones and i need every millimeter under the tank


  18. #718
    ASF Gold Full Member Surt's Avatar
    Join Date
    Jan 2009
    Location
    Alice Springs, Northern Territory, Australia
    Posts
    4,562
    too much sex and sun today, been fucking with the wheels day long on my shed's roof, my body is itching from the paint remover, wire brushes and sun burn, now thats gaids



    the place that i love the most of the whole Moscow, so-called Shanghai, soon fugly tycoons are gunna grab it and where am i supposed to go with all my bike projects? they just don't give a fuck!


  19. #719
    Bloke with the stick Gix11's Avatar
    Join Date
    Jun 2003
    Location
    Gold Coast, Queensland, Australia
    Posts
    17,574
    Blog Entries
    34
    Are they actually going to buy it an flatten the whole area or is it just talk at the moment? It'd be a shame to lose that summer spot on the roof hey? Fuck being up there in the winter though.

  20. #720
    ASF Gold Full Member Surt's Avatar
    Join Date
    Jan 2009
    Location
    Alice Springs, Northern Territory, Australia
    Posts
    4,562
    yup they gunna invest $ 2 billion into the "reconstruction" of this area, so they've kinda bought it but not from us the sheds owners, they say we take the territory illegally, altough it was given by gov to the science academy for the 'garage cooperative' 30-40 ys ago. most of the sheds were sold to new owners, but the fact doesn't make them 'illegal'? they just fuck the law and order, the justice is their whore!

    well, we are alive while we're moving or you can stop and fucking drown

    turning dunlop into michelen



    phosphate primer




    panorama from my sheds roof, 5000 sheds surrounded by the uptown buildings, unfucking believable place, kinda sanctuary!













    btw these are my 2 sheds roofs, silver and red





    the bloody never never land!

    concerning the sump


Page 36 of 43 FirstFirst ... 263435363738 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •