Busa bits Wanted

ozkat · 02-03-2008, 08:07 PM

I thought i may as well try here, you never know whats floating around.
WANTED
1. Standard Busa sump to suit K7 (i think 99-07 are the same)
2. Rear standard plastic undertray. (can be a bit damaged)
3. Busa lower fairings 99-07 (again can be a bit damaged)
4. The plastic bits that go between the fairing and tank as well as the 2 bits that go up aroung the gauges)
5. Busa fuel tank, must run the same fuel pump as K7 (again a little damage is ok)
6. 99-07 Busa pillion peg mounts
7. Brake torque arm.

**BANDITROD** · 02-03-2008, 08:12 PM

are you making carbon replacements shayne and need these parts for moulding or have you had an off mate

**ozkat** · 02-03-2008, 08:30 PM

quote:Originally posted by BANDITROD

are you making carbon replacements shayne and need these parts for moulding or have you had an off mate

Sort of mate, trying to keep all my standard Busa stuff original
1.The sump needs to be modified to suit the turbo
2.Need a under tray so i can push the rear wheel back 8in and i dont want to cut up the original.
3.Same with the lower fairings, i dont want to cut them at all for the turbo, and will make carbon ones from them.
4.Want to make some carbon ones but will have to modify the originals, so another set is needed
5. Yeah carbon tank
6. and 7. everything else is black except these. Again i want to keep the factory originals

**NakedTurboBusa** · 02-03-2008, 09:44 PM

I have a torque arm, a brand new fender eliminator ( may help may not), tank, but is 2000 model ( external fuel) rear tail section..

also, set of 3 Brake discs, 8000km old.

and heaps of other stuff

cheers

Pete

**NakedTurboBusa** · 02-03-2008, 09:45 PM

I have rear peg mounts too, also rear sets

**ozkat** · 02-03-2008, 09:54 PM

Hey Pete, pm me your ph number, ill give you a call. Also interested in how you went with the electric shifter.

**NakedTurboBusa** · 02-03-2008, 10:09 PM

Shayne

I just PM emailed you my numbers

Pete

**NakedTurboBusa** · 03-03-2008, 08:55 PM

hey Shayne

not sure if you got my PM. My number: mb 0414579161

**ozkat** · 03-03-2008, 09:05 PM

Thanks Pete, i didnt get it, i think i have prob with messages on here, Si sent me a test message this arvo and i didnt get it either. Ill give you a call tomorrow.