Hey Jak, raise it up heaps, Ive put mine inline with rikkies, I think actually a touch higher, ask ben he thought it was too high. Remember that the seat kicks up heaps to handle the angle, Just a thought.
Mine will be done next week so I'll send you photos then.
I like it!
Good shit Jarrod, be good to see it with the tank and seat on to see where it all really sits.
Interesting. Forgive my lack of new bike tail piece knowledge. What tail is it off mate?
04-06 R1 Si, will try find a pic of an arse end to show you.
http://www.bikepoint.com.au/Tig/UI/P...R1T&p=14188314
I wont be putting the undertail exhaust on mine so will see how that goes...
Jarrod
the tail looks like it extends to far out past the rear wheel......it should end a little before or be even with it......any further back and it starts to make the tail dwarf the rest of the bike
Yeah I know.. When I have the tail attached, it lines up with the edge of the rear wheel perfectly. Its just my poor photography that makes it seem way over...quote:Originally posted by dudad
the tail looks like it extends to far out past the rear wheel......it should end a little before or be even with it......any further back and it starts to make the tail dwarf the rest of the bike
Jarrod
Hey guys and gals.
Here are a few more recent pics of the work ive been doing on the GSXR.
I finally got my undertail and front seat so I started by painting the ducktail and undertail ASF black..
When taking the old subframe off, I was left with considerable wiring to find a new home in my new subframe.
Here are a few pics of the tail attached to my bike ( not completely finished as you can see plugs and hoses hanging around.
As you can see from the pic below.. the tail lines up with the rear of the rear tyre.
More pcs to come as things get finished
Jarrod
lookin good jarrod keep up with pics
Glenn Eason drinks and smokes and lends his arse to other blokes
getting there mate. got a pick with it off the paddock stand?
Here you go mate.quote:Originally posted by Deano
getting there mate. got a pick with it off the paddock stand?
Also forgot to mention that I have a set of twin K&N pods to go on te bike too. Airbox stopped the attachment of the subframe so off it went lol...
Jarrod
Looks good Jarrod.
"It's the eighties and I'm down with the ladies"
looking good mate that thin tail piece flows well from the narrow tank. what sort of exhaust are you going for?
Honestly. I have no idea.. all depends on money etc. At the moment, its gonna stay as the 4-2 that it has with Alfies pipes unless some money appears from somewhere lol... (bring on lotto lmao).quote:Originally posted by zx12argh
looking good mate that thin tail piece flows well from the narrow tank. what sort of exhaust are you going for?
Jarrod
Fark what a difference M8 , thats for you for sure , nice touch
Awesome, Jarrod I like your work.
Makes me feel like a slackarse as far as my projects go.
nice one jarrod uve been busy time i got busy too but a little dirt bike just feel in to my garage and i need to get it cleaned up cos im not sure what im gonna do with it yet
Yeah, im pretty happy with how things have turned out so far. Just a few minor things to do so I can get it rideable.
1. Cover rear seat hole with either a cowl or fibreglass over it.
2. Find or make a hugger
3. make a mini screen for above lights and speedo.
4. make or find a cheap fender eliminator.
5. find a smaller replacement water reservoir to fit into new subframe.
Hanging out big time to go for a ride... getting DT's
Jarrod
Updated pics of what the bike is at as of tonight.
As you can see below, the new paint job on the tank has worked a treat.
Not sure if you can see it, but I got a new top yoke for the bike being an ABM yoke from Stu (thanks again mate). Mounted the old speedo bracket onto the new yoke but mounted it below yoke instead of on top like last time.
Got myself a 4-1 system finally. Ive also attached those blue side covers on, just have to attach the rocker cover onto finish the look.
1. Put twin Pods on.
2. Attach replacement radiator reservoir.
3. New Jets for carbs to match exhaust and pods.
4. Find rear seat cowel.
5. Powdercoat wheels black.
6. .... as things come to mind.
Jarrod
mate that looks wicked - theres a whole lot of air between the tyre and the tail - love it [] The exhaust is looking good too.
Have you thought of going blue on the wheels to tie in the engine bits - I hate to say it but man those bits are blue...
Posting Permissions
Reply With Quote
