i have a spare 750 head that i can play with and a spare set of cams, so this comming week ( if not befor ) i'll hopefully have figured out the cam angle sensor set up, the rocker box cover is off to the polishers tomorrow ( he has some good juce that takes th paint and oil off ) then back into the work shop for some drilling and welding.
i might also have a go at doing the rotor for the crank angle sensor tomorrow as i will be at the work shop that i help out at on ocasions an have access to a lathe as i have to make some spacers to fit a 02 swing arm into a 85 750 chassis