-
GSXR1100 bit needed
i am in the market for the following GSXR1100 parts
sprocket cover
clutch lever and master cyclinder
clutch hose
it will be going on a 1100w but i think the oil cooled clutch parts will be the same
thanks
-
Hey Deano,
Sounds like you're getting ready to power up the Gixxer or have you started another project?
-
Bloke with a smaller stick
you would be right hornet boy!..................
-
Err riiiight.
New project/new fighter?
More power for the exsiting beast?
-
Bloke with the stick
Hey Deano, did you get one of those 1100 motors then? You animal you....
-
i have a clutch hose Deano.its my old standard length 1. i'd normally sell it for around $250 but coz ya such a good bloke its free.includes banjo bolts so if ya want it e-mail me your address an i'll post it to ya.aint got a master cylinder yet till i get my new ones.
-
Bloke with a smaller stick
Davo - I don't know if a standard length one will fit maybe munday or J7/11 may be able to help me there?
you got it in one Gix.
brought a 1100w motor
the fun begins
-
Bloke with the stick
Oh yes it does mate. Yes it does..........!
-
Bloke with a smaller stick
isn't it pretty
-
standard length fitted mine with raised bars an still had a few inchs to spare,it was on there on the coffs run.it measures 1120mm between centres.my new lines r 6" over an waddayaknow it measures 1270mm.anyhow,its there if ya want it.
-
Bloke with a smaller stick
thanks mate
if it fitted with your raised bars then i think it will be fine on mine
you have mail
-
no worries mate,i'll launch it this friday if i get time.
-
GOOD move mate.I polished off that Penfolds ya bought me & it was VELVET!
Very nice mate,thank you.
-
Tyre destroying, mad bastard menace
Hey Deano, did that motor come from Vic Wreckers?
-
Bloke with a smaller stick
yeah mate jap import i beleive
-
Bloke with a smaller stick
Good stuff Mundy glad you enjoyed it.
Hey Davo - what new master cyl you getting?
-
just aftermarket MCS,but with annodised alloy screw caps. havnt looked around much but these ones r cheap,i'm not really fussed as long as i can bleed the system without having to remove it and strap it to my lawnmower so the fluid is level. got any tric ones you know of Deano?
-
Bloke with a smaller stick
Davo
have MCS got a website? and how much? it sounds like something i could do with
i have bid on a master cyclinder on ebay US at the moment it is up to 11.00US and the same guy has a sprocket cover that to up to 11.00US
so we will see.
-
Bloke with a smaller stick
if you having trouble with the bleeding of brakes and clutch you need one of these bad boys
we sell them for about $115.00
http://www.jwl.dk/show-site.asp?Page=5&Product=trykluft
-
not sure about the web site,i'll check 4 ya,could be under "offroad imports". they do universal mc's in steel an plastic reserviors.the caps r from UK. mc cost about $120 each or cheaper if ya rootin someone in a bike shop.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules