Page 1 of 3 123 LastLast
Results 1 to 20 of 55

Thread: Unfinished project up for grabs

  1. #1
    Gix11
    Guest

    Unfinished project up for grabs

    If you want the full specs on this go to the FREE VISITOR ADS page (which you get to from the main navigation - BUY/BUILD/SELL - at the top on the home page).

    It's basically a Bandit12 project with some seriously trick bits. Here's a taster:



    Check it out and get in touch with Paul if interested. His contact details are on the ad.

  2. #2
    Tyre destroying, mad bastard menace
    Join Date
    Jun 2004
    Location
    Nerang, QLD, Australia.
    Posts
    4,699
    i reckon he should sell it in peices. proberly get more for it, saying that i WANT the JMC arm. so you blokes can forget the swinger if he breaks it up. Bugger off. i have a stick and im not scared to use it.

  3. #3
    Tyre destroying, mad bastard menace
    Join Date
    Jun 2004
    Location
    Nerang, QLD, Australia.
    Posts
    4,699
    i reckon he should sell it in peices. proberly get more for it, saying that i WANT the JMC arm. so you blokes can forget the swinger if he breaks it up. Bugger off. i have a stick and im not scared to use it.

  4. #4
    Bloke with the stick Gix11's Avatar
    Join Date
    Jun 2003
    Location
    Gold Coast, Queensland, Australia
    Posts
    17,574
    Blog Entries
    34
    This is just a picture of progress mate. If you read the ad Paul says the engine is there and I'm guessing the whole thing should be a runner if someone has the effort.

  5. #5
    Bloke with the stick Gix11's Avatar
    Join Date
    Jun 2003
    Location
    Gold Coast, Queensland, Australia
    Posts
    17,574
    Blog Entries
    34
    This is just a picture of progress mate. If you read the ad Paul says the engine is there and I'm guessing the whole thing should be a runner if someone has the effort.

  6. #6
    Guest
    OzKat, let me know if you don't take the swinger, I could well have the funds shortly.

  7. #7
    Guest
    OzKat, let me know if you don't take the swinger, I could well have the funds shortly.

  8. #8
    Guest
    i got $5 says the front master cylinder is mine,anyone wanna raise me?

  9. #9
    Guest
    i got $5 says the front master cylinder is mine,anyone wanna raise me?

  10. #10
    Power Hungry, Law Disregarder
    Join Date
    Dec 2004
    Location
    Amsterdam, Netherlands.
    Posts
    505
    G'day ppl,
    My name is Paul ,i live in Sydney. I'm not sure but I think i know some of you on here..... The bike in question is mine, and it is with regret i'm selling her. I have no funds to finish her cause my busa (Another project) drains the wallet. I thought biulding one streetfighter was bad enough...!!!!

    I havn't concidered spliting her up yet, but i'm not after much for her anyway. She has all the running gear (engine included) but has wasted too much of my time over the past 7 years. too many memories as well.

    If it comes down to it, i might just have to......Throw some offers on the table, Don't be shy, u might just walk away with a bargain.

    Cheers and thanks for ur time.

  11. #11
    Power Hungry, Law Disregarder
    Join Date
    Dec 2004
    Location
    Amsterdam, Netherlands.
    Posts
    505
    G'day ppl,
    My name is Paul ,i live in Sydney. I'm not sure but I think i know some of you on here..... The bike in question is mine, and it is with regret i'm selling her. I have no funds to finish her cause my busa (Another project) drains the wallet. I thought biulding one streetfighter was bad enough...!!!!

    I havn't concidered spliting her up yet, but i'm not after much for her anyway. She has all the running gear (engine included) but has wasted too much of my time over the past 7 years. too many memories as well.

    If it comes down to it, i might just have to......Throw some offers on the table, Don't be shy, u might just walk away with a bargain.

    Cheers and thanks for ur time.

  12. #12
    Guest
    How's it Kama? Nice bit of kit you got going there.

    How much for the lot mate?

    (PS any guys want to pool funds for the purchase. I like the swinger (Oz got first dibs on it though), but I also like the front end, wheels, seat unit, etc)



  13. #13
    Guest
    How's it Kama? Nice bit of kit you got going there.

    How much for the lot mate?

    (PS any guys want to pool funds for the purchase. I like the swinger (Oz got first dibs on it though), but I also like the front end, wheels, seat unit, etc)



  14. #14
    Guest
    paul i saw ya on the old road sunday riding solo i was with the b/bird & the ZRX,ya mate at throtal stop is a wierd one,spoke to him about your possi.he didnt ring back,thats weak.
    looks to me like OHLIN`s front am i wrong?

  15. #15
    Guest
    paul i saw ya on the old road sunday riding solo i was with the b/bird & the ZRX,ya mate at throtal stop is a wierd one,spoke to him about your possi.he didnt ring back,thats weak.
    looks to me like OHLIN`s front am i wrong?

  16. #16
    Power Hungry, Law Disregarder
    Join Date
    Dec 2004
    Location
    Amsterdam, Netherlands.
    Posts
    505
    quote:Originally posted by mad mundy

    paul i saw ya on the old road sunday riding solo i was with the b/bird & the ZRX,ya mate at throtal stop is a wierd one,spoke to him about your possi.he didnt ring back,thats weak.
    looks to me like OHLIN`s front am i wrong?
    Which Sunday was it......havnt been up there in a while. Busa has been of the road for some time. Some of you might know of it (yellow and red with extended arm)Was i riding the silver ZX12 when u saw me????

    Pete at Throttle stop is a good bloke (large tall fucker)but dosn't know much about fighters and lacks customer service skill, rob on the other hand(has massive side burns & looks like Elvis)) has a Srad gixer fighter which isn't too bad but isn't there enough to mingle with the ppl and get involved. I used to manage the place up until 5 months ago.
    But to answer ur question.....they are a Ohlins spec upgrade Gsxr1100 front end.

    Now for the Juicy stuff......Prices!!!!

    Front end (includes billet adjustable polished trees with 2 sets of risers, 1pair Tokico 6piston and 1 pair 4 piston calipers set, renthal fatbars gold and forks)...............................$1100

    Ohlins adjustable Bandit12 rear Shock with remote spring preload and nitogen canister.......................................... ....$750

    JMC swingarm extended 6" with ecentric adjuster, polished ,bottom braced............................................ ....$800

    Frame, Engine, wheels..etc..etc...this includes the leftovers....$2000

    Or u can have the LOT for $4000. I will be advertising on Ebay as a whole. will only consider splitting it up if i can get rid of all of it at the same time. no point selling the forks or swingarm if i'm stuck with a frame for 3 more years.

    Thanks for listening. (I might have a nap now, after that effort)
    Paul

  17. #17
    Power Hungry, Law Disregarder
    Join Date
    Dec 2004
    Location
    Amsterdam, Netherlands.
    Posts
    505
    quote:Originally posted by mad mundy

    paul i saw ya on the old road sunday riding solo i was with the b/bird & the ZRX,ya mate at throtal stop is a wierd one,spoke to him about your possi.he didnt ring back,thats weak.
    looks to me like OHLIN`s front am i wrong?
    Which Sunday was it......havnt been up there in a while. Busa has been of the road for some time. Some of you might know of it (yellow and red with extended arm)Was i riding the silver ZX12 when u saw me????

    Pete at Throttle stop is a good bloke (large tall fucker)but dosn't know much about fighters and lacks customer service skill, rob on the other hand(has massive side burns & looks like Elvis)) has a Srad gixer fighter which isn't too bad but isn't there enough to mingle with the ppl and get involved. I used to manage the place up until 5 months ago.
    But to answer ur question.....they are a Ohlins spec upgrade Gsxr1100 front end.

    Now for the Juicy stuff......Prices!!!!

    Front end (includes billet adjustable polished trees with 2 sets of risers, 1pair Tokico 6piston and 1 pair 4 piston calipers set, renthal fatbars gold and forks)...............................$1100

    Ohlins adjustable Bandit12 rear Shock with remote spring preload and nitogen canister.......................................... ....$750

    JMC swingarm extended 6" with ecentric adjuster, polished ,bottom braced............................................ ....$800

    Frame, Engine, wheels..etc..etc...this includes the leftovers....$2000

    Or u can have the LOT for $4000. I will be advertising on Ebay as a whole. will only consider splitting it up if i can get rid of all of it at the same time. no point selling the forks or swingarm if i'm stuck with a frame for 3 more years.

    Thanks for listening. (I might have a nap now, after that effort)
    Paul

  18. #18
    Bloke with the stick Gix11's Avatar
    Join Date
    Jun 2003
    Location
    Gold Coast, Queensland, Australia
    Posts
    17,574
    Blog Entries
    34
    Huddo says he interested. Call Brad on 0418 265 732. Intrested in a whole sale....

  19. #19
    Bloke with the stick Gix11's Avatar
    Join Date
    Jun 2003
    Location
    Gold Coast, Queensland, Australia
    Posts
    17,574
    Blog Entries
    34
    Huddo says he interested. Call Brad on 0418 265 732. Intrested in a whole sale....

  20. #20
    Guest
    Mate,sure it was a yellow "BUS" check ya garage!!

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •