Carrozzeria Wheels 1 set suit 05-08 GSXR 1000 SOLD

[fimpBIKES]

werd

[Gitzy]

Step 1 - Buy Them
Step 2 - Ask Ben

lol.. Not sure dude, you can make anything fit anything if you wanted..

Here are the differences between your setup and an 05-08 Gixer 1000 thou.. (highlighted in red)

I'm guessing\spit balling at a glance you would need rotors off an 05-08 Gixer as yours are no good with zeria's PCD being different.. some 1mm spacers to space the rotors out to 134mm to centre them in your calipers.. some spacers fabbed up to compensate for the 15.5mm difference in fork spacing at spindle clamps and to accommodate the 7mm drop in outside to outside bearing measurement.. not to mention axle diameters blah blah..

All the numbers are there dude, just add em up and see if they fit.. they would certainly look good though..

[chopiesel]

seriously....the ones fimp has are for a gixxer, he got them from me from my tl, all the need is the front spacers, just look like two big sump plug washers

i cant remember if there was some washers to space the rotors or not....fimp?

[fimpBIKES]

they arent washers, they are "engineering spacers" LOL

two M8's under each bolt to be precise


btw, my carozzi's have bolt-on rotor mounting bits, my current front end swap will involve getting some custom ones done up to suit the new forks and radial callipers;

[Gitzy]

quote:Originally posted by chopiesel

seriously....the ones fimp has are for a gixxer,

Ahhhh this I didn't know.. There you go Albi, fimp is local to us too so you could pick his brain.. They would look mighty good with a polished frame

[ALBI]

hey fimp so all you did was use m8 flat washers under the rotor to space out from rim??
hey mate have you got some pic s of said tl ??

[Gitzy]

What about the PCD of the rotors??

I'm guessing by this pic that your forks are K1/K2 GSXR 1000 fimp??

If so they have the same PCD as the TL1000 and the rotors are interchangabe but the K5-K8 Gixer thou rotors have 120 PCD, rendering Albi's current rotors useless.. make sense??

[fimpBIKES]

i have 02 gixxer forks in that picture, with aftermarket tl1000r spaced triples

the washers go between the brake calliper and the mounting face on the fork lowers
which moves the brake calliper towards the centre of the bike (making up for the wider TLR triples)

what forks would you be using albi?
the problem with any radial brake front end is you cant move the callipers in and out from the centreline of the bike.
The alternative is to move the rotors, and since rotors can be worth $500-600 i figure getting some custom spacers machined up is worth the bucks

[fimpBIKES]

anyways, wanna borrow my wheels for a week to figure stuff out?
it'll give me a good reason to pull things apart

[ALBI]

was going to keep the tl1000s front i like how it handdles?
whos rotors r u using ??

[Gitzy]

Slightly off topic but are you riding the Tiller to NFR fimp?

[ALBI]

if i borrow ya wheels ya may not get them back lol

[fimpBIKES]

if youre keeping the tls front end then its a piece of piss to make the front wheel fit
im sure ben could do you up whatever spacers you would need

gitz, katana for nfr
not enough $$$ right now for two rego's

[Gitzy]

quote:Originally posted by fimpBIKES


gitz, katana for nfr
not enough $$$ right now for two rego's

Ah coolies, yay I get to see a Kat in real life.. will you be leaving early friday morning with moi or you heading down later..

[EXBEN]

Sorry to other interested Parties but they are SOLD.
Feel free to call me for a good deal on another set though.

[ALBI]

damm you to hell hell hell get them back ben !!!!!!!