Results 1 to 2 of 2

Thread: Machinist wanted - Swingarm bushes/spacers

  1. #1
    Weekend Warrior
    Join Date
    Jan 2010
    Location
    Canberra, ACT, Australia.
    Posts
    238

    Machinist wanted - Swingarm bushes/spacers

    Looking for a machinist in the ACT who can make up some new swingarm pivot spacers for me. It's to adapt a 2004-05 swingarm (25mm pivot) to a 1990 frame (20mm pivot).

    Thanks in advance [^]

  2. #2
    Bloke with a smaller stick
    Join Date
    Feb 2005
    Location
    Melbourne, Victoria, Australia.
    Posts
    3,242
    if the needle bearings are going to run on them they will need to be made from hardened ang ground bearing steel

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •