Gday girls i'm back form my absence due to lack of internet and have a new project on the go.
the base is a 1988 GSXR750J
since acquiring the bike i have completely stripped it and replaced headstem bearings, wheel bearings, swingarm bearings, brake pads, cleaned, inspected and fitted 1993 usd forks, pulled apart and cleaned gunk out of front and rear calipers and fitted front braided brake lines.
the starting point
The Plan
after much thourght i have decided that i don't need 2 streetfighters so this bike will be fully faired.
I have acquired a loan from RR7/11 some geniune RR fairings so that i can take a mould from them and make a set for the bike.
The seat unit will be a yoshi RR unit.
the frame is already 90% prepped for polishing by previous owner so will be a shame to let all that work go to waste
The 750 motor will be replaced with a 2005 bandit 1200 that has 4000km on the clock.
swingarm will probably get swaped for something newer with an over brace and i will fit a GSXR1000 rear shock with ride height adjuster
alot of this bike will be made up of spare parts that a laying around. so that means it will have GSXR750W instruments, wiring loom and switch blocks.
and to top it off it will be painted in as close to geniune GSXR750R paint scheme.