-
Ive done a few more things to this bike over the last few weeks.
One is get all the brackets done for the belly pan.
The other is do the ignition barrel relocation.
And the coolant expansion bottle bracket made.
There all done now and things I can tick off other then painting them as they are still raw allow and steel.
I got my new dog-bones as well for the 1000 swing arm conversion.
Here is some pictures.
Ignition key relocation,
https://i.imgur.com/M9KWoSD.jpg
Belly pan mounted, It will see some further glassing details fixed before final paint.
https://i.imgur.com/ekHlrRB.jpg
The new coolant bottle bracket is done. got some new fittings for it as well,
https://i.imgur.com/vHYCXF4.jpg
Next is to re-glass the rear tail into the race tail once again. This is so I can have a stock seat again.
After NFR I'll have the pipe and the dash so further progress to get this thing running will happen.
Until then, see you at NFR! :cool:
-
I've said it before and I'll say it again; love your work Luke!
-
Bike is looking awesome mate.
-
-
Still my bike ;)
Been a while from my last update and things have been moving along, just slowly though (for me)
I have gone a made myself a side exhaust from the stock unit. I cut the exit pipe off and then the big box it was attached to. Re-welded it on its side and then boxed it all up. Looks like it should have been that way if you ask me.
https://i.imgur.com/77PXzSy.jpg
I also painted all the brackets I've made including the dash mount.
I need to work on the dash & headlight loom and cut and shunt it all and change a bit of it.
https://i.imgur.com/MJQDG5D.jpg
https://i.imgur.com/I4Mahjz.jpg
I also got some bar mount indicators, but I didn't like them on the bars so put some M8 riv-nuts in the frame and screwed them in there. They work well in this spot and don't look to bad. Just need to wire them up.
https://i.imgur.com/yXoRiNW.jpg
I've also started working on the fiberglass for the remount of the tail section.
Needs alot of work but it is started, and once its finished should like it belongs.
https://i.imgur.com/ltMm0TJ.jpg
As you can see, things are moving along.
-
looks good, mint job on the exhaust
-
Really coming together mate. Nice one.
-
-
The bike has been just about complete. Finished remolding the tail unit to suite the K7 front race unit.
I've given the tank and tail a temp cover in satin black until I can organised the crew in the new year to give it and the R1 a proper paint job. anyhoo, enough dribble, pictures.
https://i.imgur.com/xZFwxDc.jpg
https://i.imgur.com/b1P69hM.jpg
https://i.imgur.com/lLRadKG.jpg
https://i.imgur.com/0Mo8BtG.jpg
https://i.imgur.com/Ikx0ioW.jpg
https://i.imgur.com/kfenNBf.jpg
-
nice job, that looks mint
-
Fucking brillant mate. Nice job