If youve been enjoying the new blog area on ASF and you want to access it where ever you are then this is going to please you. At the top of the main page you will see a banner that says "Recent Blogs Posts"........... on the same line, but on the right side of the page there is a small orange icon that is an RSS reader.All you have to do is install an RSS reader app on your iphone, blackberry, android etc, and follow the instructions how to add an address, then you ...
Yep, the draws been made. So if your name was down in the thread to win a custom made motorcycle seat from Kev at VCM you best get your arse to this post ASAP: http://www.streetfighters.com.au/forum/showthread.php?22999-Dec-2011-Win-a-Custom-made-Motorcycle-Seat-from-VCM/page3 Cheers guys
Hey guys just starting a blog (thanks Si) and will be hosting pics so you guys can see whats doing and see updates as to whats happening here at VCM , alot has been happening of late just take a look at the pics and you will see , latest editions to VCM is our own ROBMAC'S GSX 1400 ,DESTINO CUSTOM GARAGE'S ural side car and this awesome TURBO GSX 1400 from Ben @ Extreme Creations , i also do alot of cafe racer work as well these days and alot of reproduction work and just general recovers of all ...
Updated 21-12-2011 at 04:10 PM by kev@vcm
Now I have my mould I need to prep it ready for fiberglassing. I started with 240 wet and dry then went to 400, 600, and finished up with 1200 then T cut to get it as shiney inside as I could Now ten coats of wax. Well, the mold has had ten coats of wax, and its ready for P.V.A. Because the surface has been ...
First I'm going to make up a form for the pod I will cast then graft onto the pan. The MDF form will be filled with expanding foam then sanded into shape and fine filled. From this I will take a cast and produce a mould to reproduce the finished pod. Shape looks right As does the height. Ok, ...
Updated 21-12-2011 at 06:53 AM by CBRRRT