Recent Blogs Posts

Hey guys just starting a blog (thanks Si) and will be hosting pics so you guys can see whats doing and see updates as to whats happening here at VCM , alot has been happening of late just take a look at the pics and you will see , latest editions to VCM is our own ROBMAC'S GSX 1400 ,DESTINO CUSTOM GARAGE'S ural side car and this awesome TURBO GSX 1400 from Ben @ Extreme Creations , i also do alot of cafe racer work as well these days and alot of reproduction work and just general recovers of all ...

Attached Thumbnails

     

Now I have my mould I need to prep it ready for fiberglassing. I started with 240 wet and dry then went to
400, 600, and finished up with 1200 then T cut to get it as shiney inside as I could
Now ten coats of wax.



Well, the mold has had ten coats of wax, and its ready for P.V.A.



Because the surface has been ...

First I'm going to make up a form for the pod I will cast then graft onto the pan. The MDF form will be filled with expanding foam then sanded into shape and fine filled.

From this I will take a cast and produce a mould to reproduce the finished pod.



Shape looks right



As does the height.

Ok, ...