Blog Comments

  1. Mishdog20's Avatar
    [QUOTE=BANDITROD;bt123]Oi I don't suck just anyone's arse only mishdogs thank you very much haha[/QUOTE]

    Damn you get me hard Roidney
  2. ozzy1100's Avatar
    [QUOTE=Gix11;bt129]What Rod said. Definitely blog the shit out of everything![/QUOTE]

    the master has spoken... done...
  3. Gix11's Avatar
    What Rod said. Definitely blog the shit out of everything!
  4. ozzy1100's Avatar
    mag drill will work but if you want to use anything less than m14 (12mm smallest brouch) you need to use one with a chuck. I wanted 1/2unc because it matches std milling clamp kits so that meant a 10.8 drill size. U still need to do something with tapping ( you could test tapping in mag drill ) and to be honest you wont really save any time because you will have to finish every hole before moveing ( I like putting one drill etc in and going till I get sick of it saves time ). I have a second piece of bizaloy 400 at 25mm I want to make into a smaller fixed table useing the same lay out so any tooling can be used between the two. For that one Im hoping I can fit in into the mill but still have the problem of almost 300kg on the mill table. If that dont work Ill be forced to do it your way with a mag drill ( Ill be fucked if Im hand doing 25mm biz 400!!!! )
    In your case probly comes down to what thickness plate you want ( allow up to $500 for some decent plate ), number of holes and what sizing you are chasing.
    Btw I dont own a mag drill.... tho I do own a slightly used pistol drill
    other option is pay someone else to drill it for you lol
  5. Gitzy's Avatar
    Nice one Lynton, now I've used the demmeler table and seen felix Id love to make one similar on a smaller scale. Is it cheating If I use a magnetic drill? .. bugger that pistol drill your mental for using that..
  6. DCRacing's Avatar
    Top Stuff Lynton!!!
  7. Gix11's Avatar
    Nice work Lynton.
  8. ozzy1100's Avatar
    [QUOTE=BANDITROD;bt123]Oi I don't suck just anyone's arse only mishdogs thank you very much haha[/QUOTE]

    seletive thats why you are the king master blaster lol
  9. BANDITROD's Avatar
    Oi I don't suck just anyone's arse only mishdogs thank you very much haha
  10. ozzy1100's Avatar
    [QUOTE=Mishdog20;bt121]Jesus Lynton, i don't envy the drilling you have ahead of you mate...king oath you need to continue the blog, and with bulk pictures...[/QUOTE]

    might turn it into a build thread, looks like this blog thing sux more arse than rod on a summer holiday......
    holes dont fucking tell me about holes, 5 hrs yesterday just to drill the pilots and have just come inside after 1 1/2 hrs drilling the sized holes
    rsi I tell you and with no happy ending not fucking happy but fuck it looks sexy lol
  11. Mishdog20's Avatar
    Jesus Lynton, i don't envy the drilling you have ahead of you mate...king oath you need to continue the blog, and with bulk pictures...