HOW TO

Blogs on how to do things from the guys that know how!

  1. How to: Swap your front stem to accept new front end.

    Here is a brilliant pictorial based example as posted by aaa123:

    2012 CBR1000RR stem will not fit the VTR frame as it is to large at the top bearing.

    I got a SP1 lower triple clamp.

    SP1 lower triple on left, CBR lower triple on right,








    ...
    Categories
    HOW TO
  2. Adding a video to your post.

    Add video by clicking on the following symbol: Name:  video.png
Views: 6
Size:  625 Bytes or just putting [ video ] and [ /video ] (without the spaces) around the URL of the video.

    The URL is the address of the page you are on when viewing a video.

    i.e. http://www.youtube.com/watch?v=U5J5J8k4hH8

    You can also get this addrtess by clicking the "Share" button under the video window in Youtube. Make sure the code is highlighted blue then click CTRL and C at the same ...
    Categories
    HOW TO
  3. How to "make a water cooled GSXR 7/11 "

    How to "make a water cooled GSXR 7/11 " - Submitted by Deano (Dean Molloy)
    ...
    Categories
    HOW TO
  4. How to "advance ignition yourself"

    How to "advance ignition yourself " - Submitted by Cruisecontrol (Daniel M)

    Ignition Advancer

    Regarding the ignition advancer, just do it yourself. It is a very quick and simple mod that won't cost a cent.

    Step 1: Remove the Signal Generator Cover (right/front engine cover).

    Step 2: Remove the trigger rotor by removing the bolt in the center.

    Step 3: Remove the 3 screws holding the ignition plate and loosen
    ...
    Categories
    HOW TO
  5. How to "Polish aluminium/alloys"

    How to "Polish aluminium/alloys" - Submitted by OZKAT (Shayne Parker & Matt Fox)
    ...
    Categories
    HOW TO
Page 1 of 3 123 LastLast