PDA

View Full Version : VFR 400 & NSR 250 SSSAs for sale



TurboKat
10-11-2009, 09:41 PM
The one in the pics with the wheel attached is the NSR job & the other is the VFR 400 R. You'd think that the 400 arm would be a bit beefier than the 250 chap but it's actually the other way around.
The arms are quite different castings as can be seen in the pics (I like the NSR one - it's chunkier & has smoother lines) but they're identical widths at the pivot & the pivot to axle centrelines are the same too.
I'm arksing $400 for either arm complete (the hubs, brakes, etc are interchangeable between both arms) with disc, caliper, sprocket carrier, wheel (18 X 4.5") & linkage.
The remaining arm will have the linkage & sprocket carrier but not the disc, caliper or wheel $100
Hub bearings feel good in both arms.
These ideally would suit a sub 600cc STREETFIGHTER (I'm looking at YOU Iceman) but Mad Mundy had a 400 arm in his Gixer 11 & apart from a couple of homemade dogbone related incidents ;) it seemed to handle the torque OK.
I can box them up & postage-ise them if needed.

Who else reckons the Icemobile needs a single sider? [}:)]


http://www.asfphotos.com/upload/1257882154.jpg


http://www.asfphotos.com/upload/1257886573.jpg


http://www.asfphotos.com/upload/1257918857.jpg

Iceman
10-11-2009, 10:08 PM
I have no money:(

latheboy
10-11-2009, 10:14 PM
Single siders are ghey

Iceman
10-11-2009, 10:16 PM
and if you don't believe him, he'll fuck your bum!

80s freak
10-11-2009, 11:03 PM
Cause he, like you TK, is a bum fucker! hehe. (Don't come to my fucken wedding... mumble... fucker... mumble)

pt
10-11-2009, 11:06 PM
quote:Originally posted by Iceman

I have no money:(


Lay-By the fucker [}:)] I reckon a turbo GS500 could do with a SSSA....[?]

TurboKat
11-11-2009, 07:25 AM
Ice - If you actually charged a fee for the services you provide in the local public toilets at night, you'd be able to afford trick shit like Single Siders. [:0]
Ivan - FACT - Single Siders rule the world & chicks dig 'em if YOU had the vision, fore<s>skin</s>sight, style & skill to put a single sider in your bike ;) you'd be the envy of both your friends.
Geoff - Screw you hippy !! I know you're only getting married to a proper girly type to deflect attention from the fact that you're a Goatfucker, that's why I'm not lobbing. (did the stator work OK?)
PT - I like the way you think... wanna buy a SSSA? ;)

80s freak
11-11-2009, 07:55 AM
Tk stator gave me very similar output voltages to original one which is a C.A.E.S. one less then 12 month old. reg/rec tests ok too. I must have a current drain somewhere in the lighting set up might have to rewire it again. Good charge without lights, just over batt voltage at 4 grand with one 60/55w light. So thanks for the stator but not required, you can get it off me at the wedding. Oh that's right you're not coming....Arsehole.:D

fimpBIKES
11-11-2009, 08:28 AM
quote:Originally posted by TurboKat
Mad Mundy had a 400 arm in his Gixer 11 & apart from a couple of homemade dogbone related incidents ;) it seemed to handle the torque OK.


i wonder where that ended up...
hehehe

Large
11-11-2009, 09:03 AM
quote:Originally posted by fimpBIKES


quote:Originally posted by TurboKat
Mad Mundy had a 400 arm in his Gixer 11 & apart from a couple of homemade dogbone related incidents ;) it seemed to handle the torque OK.


i wonder where that ended up...
hehehe


Conrad, I've noticed you keep posting up cryptic hints about what's happening at your secret fimpworx....yet there is never any corroborating evidence in the form of digital Polaroids.

Pics or b&

fimpBIKES
11-11-2009, 11:47 AM
sure, i will bring pics to the NFR
perhaps that will help get you to turn up [:P]

pt
11-11-2009, 05:35 PM
quote:Originally posted by TurboKat
PT - I like the way you think... wanna buy a SSSA? ;)


i think these little arms will be too little for me new bike. Definitely too little. And i aint buying a GS[:p]

thepj
11-11-2009, 08:15 PM
wonder how it would go on the sv aye

*edit* after looking into it i'm abit short on equipment to pull off a job like that and shed space.

DiscoDan
11-11-2009, 09:13 PM
quote:Originally posted by thepj

wonder how it would go on the sv aye


650? I was thinking the same thing. I'd never thought too hard about putting as SSSA on the next project (which will be SV based) but it would be kinda cool

Iceman
12-11-2009, 05:28 PM
quote:Original post by TurboKat
Ice - If you actually charged a fee for the services you provide in the local public toilets at night, you'd be able to afford trick shit like Single Siders.
Well.... they all leave a small deposit[:I]

80s freak
12-11-2009, 10:25 PM
^^^^haha

JackTar
13-11-2009, 07:33 PM
If one was for an 800 I'd take it.

crazymofo
15-11-2009, 09:17 AM
TK: can you tell me the diameter of the swingarm pivot bolt and the width of the arm at the pivot? may interesed in the 400 arm.

TurboKat
16-11-2009, 11:26 PM
20mm & 204mm Joe.

crazymofo
17-11-2009, 10:03 PM
TK: ya got mail.

cheers.joe.

TurboKat
22-11-2009, 10:32 AM
SOLD