PDA

View Full Version : gsxr1100w stage 3 camshafts $200 ***SOLD***


jose
03-11-2009, 12:52 PM
http://www.asfphotos.com/upload/1257299134.png



Ivan Tinge stage 3 camshafts to suit GSXR1100W.

$200 :D
03-11-2009, 04:22 PM
Ivan or Dean Tighe?

How long ago were they ground?

Ask Livewire about his experiences with Dean Tighe.
jose
03-11-2009, 06:11 PM
The guys who did the work on my bike said that the cams were done by Ivan. Since I bought them second hand about a year ago I don't know when the work was done. The guy I bought them from was a sidecar racer. Sorry I can't help much more than that. :D
03-11-2009, 07:25 PM
Have you got specs on them?

Definitely interested.
jose
03-11-2009, 08:05 PM
Sorry I don't have the specs. I can measure the height of the lobes with a vernier if you want?

Or try to take a side on photo which shows the amount of material that has been added. If you know what I mean?

:D
03-11-2009, 09:32 PM
Measurement of lobes will be help. Have a look and see if anything has been engraved on the cams anywhere. Usually on the ends.
DCRacing
04-11-2009, 11:15 AM
I will take them if Nitro doesn't......
Let me know :)
04-11-2009, 03:36 PM
Bit more info and I'll say yay or nay.
jose
04-11-2009, 03:47 PM
On the ends of the camshafts the following is stamped:

Intake C 1(or i) 389 C

Exhaust B M(or 11) 0 1 C 1(or i)


Measured the height of the lobes with a vernier.

The lobes on the intake are 37.80 ish

The lobes on the exhaust are 37.65 ish

Let me know if this helps?

:D