PDA

View Full Version : ebay brisbane busa frontend$ 300



ralph
30-06-2009, 05:52 PM
does someonehttp://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=200358192987&indexURL=0&photoDisplayType=2#ebayphotohosting want to buy this for me? ****not from me****
There are some other cheap bits in ebay also

Jay_G
30-06-2009, 06:11 PM
mine..... cheers ralphy i have been after a front end for yonks.

i was about to grab this instead until you put that up it finishes in 2 1/2 hrs
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=250450571386&_trkparms=tab%3DWatching

El_Hefty
30-06-2009, 06:12 PM
they didnt last long at all

Jay_G
30-06-2009, 07:12 PM
with any luck they are straight, pretty stoked considering it comes with a wheel and discs

Cruisecontrol
30-06-2009, 07:12 PM
At that price they will be nice and clean. Not a single fingerprint on them.

sharky
30-06-2009, 08:10 PM
Have to agree with you again Cruise.....This is getting to be a habit ;)

ralph
30-06-2009, 08:15 PM
He wants $180 for the calipers

ralph
08-07-2009, 11:26 AM
How did it go Jay, Looked like a genuine add?

Jay_G
08-07-2009, 02:15 PM
i haven't had a chance to look at the gear due to being away with work, but its sitting at home in the garage. got the calipers too at a good price.

Jay_G
21-07-2009, 11:16 AM
Got home and had a look at the gear and started pulling it to bits, very happy with what i got for the money, only thing is when he pulled the brakes off he got fluid all over the fork bottoms so they need a coat of paint. also got a full receipt with the blokes full details so appears to be no "fingerprints". from what i gather he bought it as a write off to use the motor in a off road buggy

next question what top clamp can be used in place of the Hayabusa one as it is shit with big holes bored into it already for the rubber mounts.

Tony Nitrous
21-07-2009, 12:55 PM
quote:Originally posted by Jay_G

next question what top clamp can be used in place of the Hayabusa one as it is shit with big holes bored into it already for the rubber mounts.


As I posted in another thread, not the cheapest option but works OK,
I chucked both the top 2 Busa clamps and fit one of these.....

http://img189.imageshack.us/img189/8610/02topyolk.jpg

I think they come with pull back risers as stock so the bars clear
the Busa fairing but I asked for mine to be swapped for straights.