Chases GSXR1100 W

[Chase]

http://www.streetfighters.com.au/forum/upload/59530590242062.jpg


Picked this up this week from fleabay...

[Cruisecontrol]

<s>Mosman</s> er, Moss Vale?

[Chase]

http://www.streetfighters.com.au/forum/upload/59530590235794.jpg


Many hands.. many more beers.. on Friday night..

http://www.streetfighters.com.au/forum/upload/59530590232599.jpg


By Sat Morning..

[Weaselman]

fuck what did you do dissolve eveything out?
And whats wrong with the motor that it needs a rebuild

[Chase]

A bathtub of hydrochloric and the next door neighbours body... fuck wrong story... engine has 100k, so while its out why not hey

[Weaselman]

forgot you lived in snowtown

time for a big bore then

[opindown]

i was watchin that on ebay and was wondering if anyone on here would snap it up. nice work mate, looking forward to more pics

[Cruisecontrol]

quote:Originally posted by Chase

Yeah MossVale.. You know Brad?


Someone started a thread on it the other day.

Nice buy!

[Gsxar]

Very nice nights work ;)

[CBRRRT]

I hope you can remember how that will go back together mate LOL. Any ideas what you are going to do with it yet?

[opindown]

quote:Originally posted by Cruisecontrol


quote:Originally posted by Chase

Yeah MossVale.. You know Brad?


Someone started a thread on it the other day.

Nice buy!


http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=13962

found it

[Chase]

http://www.streetfighters.com.au/forum/upload/20004687338670.jpg


Got the frame back and jinnin around now with the CBR1000 sub.

[Chase]

http://www.streetfighters.com.au/forum/upload/20004687335319.jpg
Cheers to the cyber voices on the CBR1000 shock replacement advice, fit a treat.

[wackyrider]

Looking good steve. Coming along nicely

[Chase]

Hey Jules, all back and legal hey! Hows the 1?

[wackyrider]

All's good. Bike's mental and I love it. We need to catch up fpr s beer at the AFR.
I also want to sit on your R1 so I can see how it feels with the risers and bars. Want to fighter mine as soon as I have some cash

[Watto]

geez chase ya don't muck around that's for sure - mines been under a sheet/work in progress for so long coz I've been a lazy shit:D with too many work commitments - you've done more in a month than I've done in 12

will have to pull my finger out now

[Fight_fan]

Ace work Chase! I'v been wanting to powder coat my frame for ages! Its definatly happenin now! Urs looks sweet as!

[CBRRRT]

Christ mate, you can get that bike undressed and dressed quicker than a 15 year old after his first shag.

Top job mate with loads of good progress. I have a feeling with your obvious drive and enthusiasm its gonna be a stunna when its finished.

[Chase]

Cheers fellas, the progress is prob credited to drunken mates (the only way to disassemble) and an as yet undiagnosed strain of A.D.D. With any luck she'll be ready for AFR!

Anyone got any idea what rearsets will fit 1100W or where to get some model specific?

[CBRRRT]

I got some cheepo jobbys of ebay, they were £150.00 I put in a best offer of £99.00 and won them straigh away

http://cgi.ebay.com/ebaymotors/SUZUKI-GSXR1000-GSXR-1000-K5-K6-Adjustable-Rearsets_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1683Q7c6 6Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp39 11Q2ec0Q2em14QQhashZitem150273730957QQitemZ1502737 30957QQptZMotorcyclesQ5fPartsQ5fAccessories

Check mine out on my thread, they look good and cost a third of the price of what you pay for a set of Giles rear sets.

[OLD SKOOL BANDIT]

Looking real good Stevo, not bad for just 1 month. Get a slab and your mates back, I'm hanging to see this super speed build.

[BANDITROD]

looks sweet mate is that a modified cbr tail

[Chase]

quote:Originally posted by CBRRRT

I got some cheepo jobbys of ebay, they were £150.00 I put in a best offer of £99.00 and won them straigh away

http://cgi.ebay.com/ebaymotors/SUZUKI-GSXR1000-GSXR-1000-K5-K6-Adjustable-Rearsets_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1683Q7c6 6Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp39 11Q2ec0Q2em14QQhashZitem150273730957QQitemZ1502737 30957QQptZMotorcyclesQ5fPartsQ5fAccessories

Check mine out on my thread, they look good and cost a third of the price of what you pay for a set of Giles rear sets.


Fk, was looking for adjustables - I ended up getting a set of Narsurin for $200 - not bad quality but not adjustable [xx(]

[Harry]

cant beleive the build time [:0]
stainless is good,wat about kevlar ?

[Chase]

Is kevlar easy to work with? Don't think I've ever used it. where can I get it?

[opindown]

kevlar asfar as i am aware of is aplied the same as carbon fibre but is a little more expensive. spole to a guy about making a carbon bonnet for my turbo starlet when i had it and he said that i would of had to do a couple of layers of carbon, then he told me that he could make it just as strong with kevlar. do some googleing and you might come up with a place that sells it or try LSM in Toowoomba Qld http://www.lsm.net.au/ thier contact details are on thiere site.

[Harry]

im not sure mate ,i think its just a case of laying sheets of kevlar and bonding it together with some sort of resin,you would be better off putting the question up in the need some advice section im sure someone will be able to answer you better than me,iv only ever paid for finished products from gelong carbon craft but watching them work it did'nt look that hard mate,its just a case of shaping the stuff..much like fibre glass,wen its cut with mesh inserted in the holes and glued in it look's hot,be a flash look with the fighter knuckles cut out and maybe gold mesh inserted into the perferation :)
quote:Originally posted by Chase

Is kevlar easy to work with? Don't think I've ever used it. where can I get it?

[Harry]

no more pic's yet [?]

[Chase]

After much fkn around.. here's where I'm at now. Still need a shorty can, paint, and misc tidying up..

http://www.asfphotos.com/upload/1253833085.jpg


http://www.asfphotos.com/upload/1253853807.jpg


http://www.asfphotos.com/upload/1253856849.jpg


http://www.asfphotos.com/upload/1253828720.jpg

[BANDITROD]

mate l am loving the bike ....but that exhaust needs remodeling i know you stated that you need a shorty can but i reckon you need to angle it to suit the subframe and i reckon you could just cut the akro down mate its not as hard as it looks

[caotic]

FEKEN EH!!!! mint as man

needs a shorty for sure

these are what u will need
-BEERS
-GRINDER
_MORE BEERS
-SAFTY GLASSES
_STRIPPERS

and then it is done

glad to help

keep up the pics

[rod185651]

Hey Caotic, we've got the beers, safety glasses and grinder, bring the stripper and you're more than welcome mate ;)

[pt]

Looking good, love the black frame and polished swinger, cool contrast.

Like the lights too, did you get them from the US? What is the light output like and is the beam decent or really flat and wide? Any chance of a night photo from behind the bars with them on?

[Chase]

quote:Originally posted by pt

Looking good, love the black frame and polished swinger, cool contrast.

Like the lights too, did you get them from the US? What is the light output like and is the beam decent or really flat and wide? Any chance of a night photo from behind the bars with them on?


The lights are great - both halogen, I'll snap a pic tonight and chuck it up. Ordered them from the US a little while ago, euro sf has a decent range.

[Fight_fan]

I love that tail mate! Gr8 work!

[pt]

quote:Originally posted by Chase


quote:Originally posted by pt

Looking good, love the black frame and polished swinger, cool contrast.

Like the lights too, did you get them from the US? What is the light output like and is the beam decent or really flat and wide? Any chance of a night photo from behind the bars with them on?


The lights are great - both halogen, I'll snap a pic tonight and chuck it up. Ordered them from the US a little while ago, euro sf has a decent range.


cheers, thatll be good!

[pt]

any luck with the pics?

[80s freak]

looking great what happened to the RR ductail? And what's the new one?

[Chase]

quote:Originally posted by 80s freak

looking great what happened to the RR ductail? And what's the new one?


The RR tail made the seat too short so had to change the plans, the sub is still off a 04 RR, but the cowl is a modified BMW 65LS 80's model. Bit of fkn around but is coming together..

[Harry]

thats come up really nice mate,did the headlights:)
you really need to lift the can up to the same line as the sub frame
and trim the can give a full veiw of the swingarm...i did it with my slingshot,
it's much tiderer...but thats just me mate.
check this one http://www.asfphotos.com/upload/1254076483.jpg

[Harry]

that was dig the headlights...not did [V]

[thepj]

quote:Originally posted by Harry

thats come up really nice mate,did the headlights:)
you really need to lift the can up to the same line as the sub frame
and trim the can give a full veiw of the swingarm...i did it with my slingshot,
it's much tiderer...but thats just me mate.
check this one http://www.asfphotos.com/upload/1254076483.jpg




not to high jack the thread but what are those forks called? see them alot look pretty awsome.

[Chase]

quote:Originally posted by Chase


quote:Originally posted by pt

any luck with the pics?


Sorry mate been a slack arse.. get it up soon.


Thanks to Rod for getting some pics..

http://www.asfphotos.com/upload/1254221068.jpg

high beam..

http://www.asfphotos.com/upload/1254258124.jpg

low beam..

[pt]

Cheers thanks for that! Looks like they spread pretty wide pretty quick. Do they shine forward far enough?

[Gix11]

quote:Originally posted by thepj


quote:Originally posted by Harry

thats come up really nice mate,did the headlights:)
you really need to lift the can up to the same line as the sub frame
and trim the can give a full veiw of the swingarm...i did it with my slingshot,
it's much tiderer...but thats just me mate.
check this one http://www.asfphotos.com/upload/1254076483.jpg




not to high jack the thread but what are those forks called? see them alot look pretty awsome.


They're not forks mate, they're fork covers. sleeves that fit over the actual forks to make them look like super chunky forks.

[rock hard]

yeah i like the fork shrouds looks phat

[thepj]

thanks for filling me in gix11

[Chase]

Finally got the new exhaust sorted..

http://www.asfphotos.com/upload/1256510324.jpg


http://www.asfphotos.com/upload/1256504607.jpg


http://www.asfphotos.com/upload/1256523738.jpg


http://www.asfphotos.com/upload/1256531716.jpg

:D

[BANDITROD]

thats better mate

[CBRRRT]

Super tight mate, a real pro-build.

Loads-a-respect[^]

[Chase]

Big shout to Dave at Sydney Dyno for his attention to detail and breathing life back into the old girl, Cheers Mate!

[HueyonaBlade]

Super smooth real like this one specially the tail

[Chase]

Got motivated over the hols and decided to paint the bike, still needs a tidy and a decent buff but you get the idea..

http://www.asfphotos.com/upload/1263590514.jpg


http://www.asfphotos.com/upload/1263594298.jpg


http://www.asfphotos.com/upload/1263552250.jpg


http://www.asfphotos.com/upload/1263583888.jpg


http://www.asfphotos.com/upload/1263560524.jpg

[rod185651]

Steve, that looks outstanding mate! So your new spray booth stood up to the test?

[Chase]

Hey mate! Only did the primer at home, found a guy who rents out his booth $100 for 4 hours, so took it there save the fkn round here. Your trip sounded awesome - Tim dropped round last night.[:p]

[Deano]

please tell me you are doing something about the seat tips overlapping the frame rail.

[Chase]

Mods to date:
Body
- Cut Down GSXR1100 front guard
- CBR1000 04 Subframe
- Powdercoated frame
- BMW 65ls RearCowl
- Aftermarket Lights/Indicators/NumberPlate/Rearsets
- Hand polished swing arm
- Custom seat
- Polished / painted wheels
- Motodetail analogue gauges

Engine and Stuff
- CBR1000 04 Shock
- Dyna Coil / HT Leads / Iridium Plugs
- K&N Single Pods
- Metal Gear discs
- Hel brake lines
- Yoshi Can and sport system
- gsxr 1000 sprockets
- Dynod

[Cruisecontrol]

Gunmetal grey is the new black. ;)

Very nice indeed, mate.

[Ross_247]

Very noice

[bladehunter]

Good job mate, you got further info and/or pics of the clocks

[GingerNinja]

Bloody beautiful Steve. That's come up a treat.

Good job mate. What'd it make on Dave's dyno? Any dramas sorting the jetting out to suit the pods?

Still tossing up whether to go with pods or the standard airbox and K&N on my WP.

[Chase]

quote:Originally posted by playswithnitro

Good job mate. What'd it make on Dave's dyno? Any dramas sorting the jetting out to suit the pods?

Still tossing up whether to go with pods or the standard airbox and K&N on my WP.


The dyno was 146 at the rear from memory, he did a bloody good job. Th only thing I could say against the pods is it has a bit of a flat spot about 4k if you try to take off there - but no prob if you just wind it through, runs much happier up top. Looks heaps neater with the pods.

[Chase]

Ordered some new triples and decided to repaint the bike, the triples arrived a couple of days ago, so here are some new pics..

http://www.asfphotos.com/upload/1268480887.jpg


http://www.asfphotos.com/upload/1268498677.jpg


http://www.asfphotos.com/upload/1268485842.jpg

[Fight_fan]

Niice solid lookin tripples Chase! Looks awesome! Red now? Cnt make up u mind can ya! LOL

[rod185651]

As I said mid week the new colour scheme looks good, I like the contrast of the metallic fleck almost glitter in the black compared to the boldness of the red , any more pics? Or are you going to make everyone wait until AFR.

[Chase]

quote:Originally posted by Fight_fan

Niice solid lookin tripples Chase! Looks awesome! Red now? Cnt make up u mind can ya! LOL
Just trying to get my monies worth from my spray gun :D

[Harry]

that's come a long way from a friday nite raping ! nice work chase.......like the paint job,look's fast:)

[BANDITROD]

looking good chase those triples look very nice

[JackTar]

Very nice mate where did you get your triples from?

[Chase]

quote:Originally posted by Harry

that's come a long way from a friday nite raping ! nice work chase.......like the paint job,look's fast:)

I investigated the aerodynamic properties of the molecular composition of paints and found red to be fastest..

[Chase]

quote:Originally posted by JackTar

Very nice mate where did you get your triples from?
Got the triples made in the UK by Roy Martin - nice bloke and does a good job, took about two weeks to get here from when I sent the measurements through.

[Gitzy]

Thats come up a treat Chase, tripls look great, how bout some outside sunny shots?

[RevHead]

really nice,except ,the exhaust doesnt do it for me to much pipe,cheers

[Chase]

Almost got it back together - just in time for the AFR!

http://www.asfphotos.com/upload/1269754501.jpg


http://www.asfphotos.com/upload/1269681951.jpg


http://www.asfphotos.com/upload/1269774842.jpg


http://www.asfphotos.com/upload/1269706125.jpg


http://www.asfphotos.com/upload/1269684182.jpg

[VFighteR]

Nice mate - Like the headlights too. what are ya dragbars like? Are they kind to ya wrists?

[Gitzy]

Looks the goods Chase, love the paint, the zorst, the tail, all of it.. top work mate.

[Chase]

Had some spare time and a can of paint stripper...

http://www.asfphotos.com/upload/1278876662.jpg


http://www.asfphotos.com/upload/1278876304.jpg

[Chase]

Since I'd started, thought may as well do the rest...

http://www.asfphotos.com/upload/1278881976.jpg


http://www.asfphotos.com/upload/1278915430.jpg

[Chase]

What do you get if you cross a BMW 65LS and a CBR1000R tail?

http://www.asfphotos.com/upload/1278916524.jpg


http://www.asfphotos.com/upload/1278860595.jpg


http://www.asfphotos.com/upload/1278845290.jpg


http://www.asfphotos.com/upload/1278887143.jpg


http://www.asfphotos.com/upload/1278882713.jpg

[RevHead]

hey chase your as mad as me when it comes to making things ,lol

[Large]

That tail looks fucking awesum

[Chase]

quote:Originally posted by Large

That tail looks fucking awesum
Thanks Large.. It's no Spondon but we do what we can :D

[Chase]

quote:Originally posted by revheadpete

hey chase your as mad as me when it comes to making things ,lol
Product of an idol mind Pete!

[RevHead]

yeah i get bored lookin at the same shit day in day out

[wackyrider]

That looks awesome chase. Love the tail

[rod185651]

The seat looks heaps better Steve, Is the BMW Tail fiberglass or plastic? What did you end up using to join them?

[Fight_fan]

Thats come up a fuckin treat! Well done man!

[Chase]

quote:Originally posted by rod185651

The seat looks heaps better Steve, Is the BMW Tail fiberglass or plastic? What did you end up using to join them?
Yeah never really happy with the original seat, think this should look better. The tail is fibreglass and the insert is plastic. The fibreglass was originally built in layers so I cut in 1 layer the same thickness as the insert and used a epoxy glue to bond them, a bit of body filler over the top and it should come up good.

[rod185651]

Cool, so back to the spray booth now?

[Chase]

Ha, yeah.. love the spray booth.

[Chase]

First test coat to see any marks, and think it's not too bad..

http://www.asfphotos.com/upload/1279167646.jpg


http://www.asfphotos.com/upload/1279127505.jpg

[wackyrider]

that looks great

[Chase]

Decided I'd bite the bullet and have a crack at doin a shorty pipe.

http://www.asfphotos.com/upload/1282009711.jpg


http://www.asfphotos.com/upload/1281979887.jpg


http://www.asfphotos.com/upload/1281990792.jpg


http://www.asfphotos.com/upload/1282015996.jpg

[Chase]

What's the thoughts on leaving the heat shields off?

[BANDITROD]

i reckon you should chuck em back on mate but i have always liked the look of them myself

[Chase]

You thinking leaving them on for purpose or for looks?

[BANDITROD]

for looks more than anything ....i realy dont see how they would make that much difference heat wise

[Chase]

Decided to go with the heat shields, think it doesn't look too bad.

http://www.asfphotos.com/upload/1282713991.jpg


http://www.asfphotos.com/upload/1282661915.jpg