iI Finished the slabbie 15.06.10

[outlaw6660]

i just startet to change something on my
second bike
86gsxr slabside 7/880ccm

thats is how the bike looks the last 3 years
http://img253.imageshack.us/img253/6762/p1040584fr1.jpg (http://imageshack.us)

and now it`s time to change something..
there comes..

a selfmade headlight..
http://img151.imageshack.us/img151/3194/dsc00903nh0.jpg (http://imageshack.us)

a selfmade billet handlebar...
http://img177.imageshack.us/img177/512/cimg0089kk1.jpg (http://imageshack.us)

with new billet grips and new minimal electrics like these..
http://img167.imageshack.us/img167/5056/15022008212ot2.jpg (http://imageshack.us)

some billet engine covers...
clutch window cover from MS BIKES..
http://img180.imageshack.us/img180/2608/3c151yy2.jpg (http://imageshack.us)

a selfmade ignition window cover
http://img237.imageshack.us/img237/9559/zndungsdeckel2kb4.jpg (http://imageshack.us)

selfmade leftside window starter cover
http://img76.imageshack.us/img76/1282/4d591kt6.jpg (http://imageshack.us)

a 6 x17 pvm/ phoenix rear wheel...
http://img186.imageshack.us/img186/9550/felgeve9.jpg (http://imageshack.us)

and some other gimmicks..
and a new paint named dark blue chrome..

updates follows..

[outlaw6660]

now if done the first step..

billet handlebar, speedo and elektriks
are ready..
(and now its summer and my wife want drive the bike)
so i screwed only an other headlight on it..
the engine covers and the rear wheel i change next time..
and the other changes i´l made in wintertime..
(new paint, build i new tail and the headlight unit..)
and yes there are only 3 screwes in the handlebar on the pic..
now there are all 4 inside.. ;)

http://img525.imageshack.us/img525/3931/02062008042mw6.jpg (http://imageshack.us)

http://img150.imageshack.us/img150/9908/02062008043un2.jpg (http://imageshack.us)

http://img258.imageshack.us/img258/9924/02062008044nb3.jpg (http://imageshack.us)

http://img206.imageshack.us/img206/7132/02062008046fg1.jpg (http://imageshack.us)

[Gix11]

Those bars look really good mate. Work great with the wide tank as well. Keep the progress photos coming mate.

How does your wife go with the plastic seat??

[outlaw6660]

she drive the bike since 2 years
and she wont have an other seat..
it `s more comfortable as it looks..

and if any one is interestet at those bars...
i had 3 ones for sale..

[Funkenfresh]

how much are the bars?

[outlaw6660]

prices and infos per email..

[oldskool]

What linkage did you use to put that swingarm in??????

[outlaw6660]

original linkage , but modified at the exenter..
i make some pics and post them..

[oldskool]

Thanks outlaw that would be real nice.

[outlaw6660]

today i testet a new seat..
its only taped on.. sitting not in the real right position..
but i think fits good to the rest if i had fiberglass it at the end..

http://img143.imageshack.us/img143/2466/26082008425pi1.jpg (http://imageshack.us)

http://img143.imageshack.us/img143/5886/26082008426ly1.jpg (http://imageshack.us)

http://img148.imageshack.us/img148/1219/26082008427oa4.jpg (http://imageshack.us)

always comes a vance&hines sidewinder header on it with the supertrapp in the
position as now..
must change for that something at the belly...
and MUST change the fender (there comes a little smooth one on it)
if i use the headlight unit or an billet headlight (an other one as now)
i will see when i get finished the rest...

http://img516.imageshack.us/img516/253/26082008428yl9.jpg (http://imageshack.us)

continues soon...

[Fight_fan]

Nice one torsten! I like that stumpy seat, it looks fuckin hot!

[Iceman]

Top work Torsten, good to see I'm not the only one who sticky tapes their fighter together:D

[Shadowzone]

If you have anymore of those bars I'm definitely interested mate.

[outlaw6660]

@ Shadowzone

i send you a mail with infos..

[outlaw6660]

I get some more parts for my wifes baby...

brand new vance & hines sidewinder headers..

http://img340.imageshack.us/img340/892/sven2yn2.jpg (http://imageshack.us)

a Side Mount License Plate Bracket

http://img72.imageshack.us/img72/7099/6a021sa3.jpg (http://imageshack.us)

http://img220.imageshack.us/img220/56/69971sm2.jpg (http://imageshack.us)

and a f/r set of this performance machines wheels..
size 3,5x17 and 6,25x17

http://img526.imageshack.us/img526/9008/3da01nt7.jpg (http://imageshack.us)

http://img528.imageshack.us/img528/7159/34db1sk1.jpg (http://imageshack.us)

http://img442.imageshack.us/img442/8941/3b8a1ut9.jpg (http://imageshack.us)

[Shadowzone]

quote:Originally posted by outlaw6660

@ Shadowzone

i send you a mail with infos..



Yep thanks mate. As much as I like them they're out of my league dollar wise.

I'll keep saving up my cash and see how I go though.

Thanks mate.

[FIGHTERMC]

Nice set of wheels there mate.

[outlaw6660]

Hi there..
the wheels arrived these days..
its been a used set and so i startet to
polished them (first the rear one)
befor..

http://img519.imageshack.us/img519/2897/16102008129ya9.jpg (http://imageshack.us)

after...

http://img517.imageshack.us/img517/441/18102008140kj8.jpg (http://imageshack.us)

and for looking how it see..

http://img401.imageshack.us/img401/5955/17102008135wh1.jpg (http://imageshack.us)

http://img401.imageshack.us/img401/6121/17102008134nh3.jpg (http://imageshack.us)

polished the front one next week
and in november i startet with the
complete change...

[Funkenfresh]

you should paint them up the same as the body work... looks nice though!

[BANDITROD]

very nice torsten love ya work as always mate

[outlaw6660]

Saisons end in germany..
now i can start the new build of the slabbie...
yesterday i statet with it an looks how some of the new parts looks on the bike..

at first the new PM wheels, header and the basic one
for the new seat unit..

http://img230.imageshack.us/img230/1231/knickeranfang010jy4.jpg (http://imageshack.us)

http://img293.imageshack.us/img293/222/knicker08003uf9.jpg (http://imageshack.us)

http://img117.imageshack.us/img117/1658/knicker08006pv5.jpg (http://imageshack.us)

http://img378.imageshack.us/img378/3967/knicker08012im9.jpg (http://imageshack.us)

http://img227.imageshack.us/img227/6499/knicker08017ci6.jpg (http://imageshack.us)

thats all for today..
what comes next..
WHITE POVER hayabusa front fork, hayabusa swingarm (maybe a longer one ??)
leo vince gp exhaust, front + rear wave rotors, didnt know if i should
use my brand new typ 4 headlight unit

http://img201.imageshack.us/img201/5427/geil002zt8.jpg (http://imageshack.us)

or only a headlamp..
and all the little parts a had laying arround since month..
colour would be a silver/white perlmutt...

http://img90.imageshack.us/img90/1127/731ew0.jpg (http://imageshack.us)

, polished 100 things around the bike..
make all engine covers with windows...
and so on..

at thr end ther will be 80% of the bike new
and it was komplete different to this wat it was..

[Gix11]

Keep it coming mate!

[outlaw6660]

The second working day..

first i turned out the old forks
left the old ones / right the new one..

http://img352.imageshack.us/img352/2620/knicker082001os4.jpg (http://imageshack.us)

then i take out the old 11 W swinger

http://img221.imageshack.us/img221/526/knicker082008ud8.jpg (http://imageshack.us)

and check up how the busa swingarm fits..

http://img509.imageshack.us/img509/7971/knicker082011yc6.jpg (http://imageshack.us)

and with the wheel..

http://img371.imageshack.us/img371/4627/knicker082012ga8.jpg (http://imageshack.us)

http://img65.imageshack.us/img65/9436/knicker082017hi8.jpg (http://imageshack.us)

looks pretty cool i think..
i ve got only two little problems..
first one i must go 7 mm throug the right sight with the complete swingarm to get the chain runs absolutly straight..
but thats not a big problem..
i have these bubbles at the inside of the frame
http://img80.imageshack.us/img80/3563/knicker082015uk0.jpg (http://imageshack.us)

at the ride side i make them smaler for 7 mm then it goes how it should be..
make a distance for the left side..

and the second one are the linkages
they are much to short..

http://img341.imageshack.us/img341/8505/knicker082016sz2.jpg (http://imageshack.us)

but i think i make me some adjustable ones for it so i can
make it higher or lower to the right high (with or without a longer swinger)
thats all for now..

[outlaw6660]

ther are not so many thinks i could do in the last time
(i `am waiting for tonnes of parts)
but a little bit i `ve done

closed the subframe

the lower part is mirror polished stainless steel
the closing part of the seat unit would be painted in
motorcycle colour

http://img514.imageshack.us/img514/9665/knicker085007tx0.jpg (http://imageshack.us)

http://img383.imageshack.us/img383/5639/knicker085006ae5.jpg (http://imageshack.us)

and today i put the tyres on the rims

http://img145.imageshack.us/img145/645/knicker086003vo4.jpg (http://imageshack.us)

befor (left) now (right)

http://img82.imageshack.us/img82/761/knicker086002gn3.jpg (http://imageshack.us)

and take the rear wheel inside to see how it looks..

http://img372.imageshack.us/img372/7875/knicker086006yq9.jpg (http://imageshack.us)

http://img239.imageshack.us/img239/4158/knicker086007xy5.jpg (http://imageshack.us)

i think it would looks cool if the swingarm is 6-7 inch longer..

know the frontend comes complete new,(except the handlebar)
at the weekend i sold the tripples and there comes new ones in.
new rear sets comes also

http://img529.imageshack.us/img529/8614/knicker087001ry9.jpg (http://imageshack.us)

and some more little parts
i found they doesn `t fit from the old version..
if the parts arrived more next..

[CBRRRT]

All good stuff matey, looking the nuts!

[Gix11]

Where are the rearsets from Torsten? I like them.

[debaser]

looks a million times better with the stumpy seat.

[outlaw6660]

Hi mates !
after a long bad illness i �m back
and did some more work on the slabbie..
get some more new parts

http://img223.imageshack.us/img223/5485/knicker0813002vk3.jpg (http://imageshack.us)

http://img171.imageshack.us/img171/9875/knicker0813003ql9.jpg (http://imageshack.us)

and made in the last 3 days this

http://img291.imageshack.us/img291/8403/knicker089012qp3.jpg (http://imageshack.us)

http://img293.imageshack.us/img293/8909/knicker0813010qz3.jpg (http://imageshack.us)

http://img255.imageshack.us/img255/4455/knicker0813005ji2.jpg (http://imageshack.us)

http://img261.imageshack.us/img261/2253/knicker0814002zp4.jpg (http://imageshack.us)

http://img244.imageshack.us/img244/9712/knicker0814005sf7.jpg (http://imageshack.us)

http://img255.imageshack.us/img255/2830/knicker0814007yt5.jpg (http://imageshack.us)

swingarm can be streched from 3-11 inch
complete new frontend
(a new billet handlebar is under construction)
more next days..

[zx12argh]

Jeez, even your bike stand is a work of art! Looking great. Glad you are getting over your illness mate, was wondering when you would pop back up.

[Large]

You alright now Torsten?

Those triple clamps are pure bike porn. Can't wait to see this one together.

[outlaw6660]

Yes i am allright now..
thanks for asking
but must change somethings in my lifestyle
that is goes in the right position..
but i am ok and it can go on..

i hope that i have the bike at ensd of februar together
than i made the little changes at the cbr..

[porky gsxr]

im liking the overhaul,it woz cool in the first place now it just pure awsome!!

[FIGHTERMC]

looking good there Torsten mate.
glad to here you are alright now.
rgds
Frank

[CBRRRT]

Torston, All the bits you are changing on your bike, when you remove all of the old parts please could I take some for my bike before you take them to the recycle centre. lol I think I could make a killa streetfighter out of the stuff you throw away. You are so in a league of your own mate. (German) that is. coz we'er still better than you this side of the ENGLISH channel. Ha ha

[outlaw6660]

@cbrrrt
what parts did you searching..

[CBRRRT]

Every part you remove Torston they are all good ha ha, just kidding mate.

[outlaw6660]

Hi mate! sorry all the parts been sold last year..

made a little bit more work on
the bike..

rearsets..
exhaust ( position check)

http://img248.imageshack.us/img248/676/knicker12009013yq7.jpg (http://imageshack.us)

http://img208.imageshack.us/img208/6379/knicker12009014df1.jpg (http://imageshack.us)

sorry for that bad picture..

http://img187.imageshack.us/img187/1035/knicker12009012rv5.jpg (http://imageshack.us)

http://img14.imageshack.us/img14/8371/knicker12009015lm8.jpg (http://imageshack.us)

[wackyrider]

Looking great as always Torsten.

[slickncghia]

and made in the last 3 days this

....wait wait wait...are you saying you made those disks????

if you did. fucking well done. those are the essence of trik

[sen]

Damn, such an amazing looking bike.. can't wait to see it finished..

[opindown]

thats fuckin horn. luv it!

[OLD SKOOL BANDIT]

quote:Originally posted by slickncghia

and made in the last 3 days this

....wait wait wait...are you saying you made those disks????

if you did. fucking well done. those are the essence of trik


Got some very similar from fleabay US for mine. Not saying quality is same but will stop the Bandit on a penny. Mine are stamped "Made in Japan" on the centres. Go figure !

[outlaw6660]

These ones are also from ebay us...
what i think with made this the last 3 days was
all the work you have seen on the pics
not that i made the rotors..

[Gix11]

Thought you had disappeared Torsten? Glad to see you're still there mate.

[outlaw6660]

Hi all!
a very long time is gone that i post anything new
from the bike of my wife..
the last was this treat one year ago...
but than came one fu..ing illness after the other
(last op was in december)
but now it gives something new to show
about the bike...
first i changed the Haya forks against..
Honda CBR1000rr `07 forks
with chrome calipers
(not shown on the pic)

RADIAL .. GDS tripletrees
(forklcover for GDS trees are in planing)

http://img197.imageshack.us/img197/7973/neuegabel010.jpg

http://img18.imageshack.us/img18/7892/21102009554.jpg

Wheels PERFORMANCE MACHINE CHICANE 3,5 /6,0 x17
BRAKE ROTORS Galfer superbike

http://img132.imageshack.us/img132/9360/neuegabel011.jpg

HANDLEBAR at the moment..
Magura MX2
( but i made a new selfmade one fot it )

BRAKE/CLUTCH MASTERCYLINDER Nissin Radial von ZX14 with TITAX Levers

http://img191.imageshack.us/img191/9402/19012010767.jpg

http://img39.imageshack.us/img39/636/19012010768.jpg

Headlight this BILLET beauty from GLOW SPEZIAL

http://img268.imageshack.us/img268/4712/glow4nr1neu.jpg
(yes .. no headlight unit from my own ones)

Rear Dumper comes the chrome dumper from my cbr in it

swingarm at the moment HAYABUSA with extensions 6-12 zoll
(would be changed next against a bandit swingarm with the same extension)

the sidewinder headers was nice
but not rideable with the new short forks
so i changed the headers again stainless steel
bandit headers with a leo vince GP exhaust

license plate holder would be an ajustable one
rear flasher Kellermann Micro 1000 DF ( they includs the rear and brakelight)

YouTube- Kellermann Micro 1000 DF (http://www.youtube.com/watch?v=BAQxvl06uGw)

Fork + swingarmsliders from tuner factory x

http://img36.imageshack.us/img36/81/19012010759.jpg

bodywork..
Fuell tank stays as it is..

new rear seat .. is an (who knows it??)

front fender from Hesa

Belly i realy not know at the time witch one it would be..

http://img42.imageshack.us/img42/2023/30102009581.jpg

http://img39.imageshack.us/img39/6753/30102009574.jpg

http://img18.imageshack.us/img18/7696/31102009589.jpg

and also the new headlight arrives today..

http://img130.imageshack.us/img130/8296/26012010777.jpg

http://img513.imageshack.us/img513/5600/26012010783.jpg

http://img694.imageshack.us/img694/4547/26012010784.jpg

[BANDITROD]

looking bloody great torsten and good to see you are on the mend mate

[wackyrider]

Great as always mate. Hope things are all better for u now

where did u get the brake discs.......Your bike is gorgeous mate

[outlaw6660]

first thanks , and yes now i can make plans for
2010 and i can say like arnold..
"I`LL BE BACK "
@ griff
i bought the rotors here from a dealer by ebay
the correct name of them is
GALFER WAVE EXTREM price is 425 euros per pice
but i purchase them by auktion for 450 euros the pair

you can get also copies of the rotors by ebay usa from chinese dealers..
but i dont know
if it was a realy lifesafing quality??
these ones costs then 140 us dollars..
at the cbr i have now motomaster flames also
top rotors..

for watching..
scroll down
http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=8412&whichpage=6

[outlaw6660]

The new handlebar is ready...

http://img396.imageshack.us/img396/5923/18032010885.jpg

more pics here..

http://img511.imageshack.us/slideshow/webplayer.php?id=18032010884.jpg

next will be the new swingarm..
forkcovers
rest work at the seat and exhaust
than the paintjob and it is ready

[FIGHTERMC]

fook mate thats nice
some amount of work gone in to
it.

[outlaw6660]

Time goes by and the slabbie gets
more and more on the way to finish..

everybody in germany told me
"you can`t use forkcovers
when you have GDS triple trees,
because you can`t screw the radial clamps..
but i make some and can screw all what i want..

http://img24.imageshack.us/img24/3669/240520101030.jpg

http://img694.imageshack.us/img694/5565/12052010989.jpg

http://img3.imageshack.us/img3/5583/12052010992.jpg

and the chrome rear suspension from my cbr(sc44)
find a new working place

http://img718.imageshack.us/img718/6584/200520101017.jpg

http://img683.imageshack.us/img683/8563/190520101014.jpg

and at last so far all the front electrik is working..
brakelines and all kables are on their places

http://img691.imageshack.us/i/24052010062.mp4/

Tomorrow should come the body parts back from the painter
and i hope the swingarm comes till the end of the week
also back..

[sen]

quote:Originally posted by outlaw6660

http://img24.imageshack.us/img24/3669/240520101030.jpg




Jebus.. that's pretty much the hottest front end i've ever seen! [8D]

[outlaw6660]

some parts arrived..
first i get a new sproket

http://img190.imageshack.us/img190/2081/270520101034.jpg

and the swingarm is back from drilling
now fits the 28mm hayabusa axle in the
25 mm gsxr swingarm..

http://img3.imageshack.us/img3/5002/280520101037.jpg

http://img27.imageshack.us/img27/8450/280520101036.jpg

http://img340.imageshack.us/img340/5866/280520101039.jpg

http://img197.imageshack.us/img197/7813/280520101040.jpg

now i must drill the caliper holder a little bit smaler to fit
between the wheel and the swingarm..

half an hour later the swingarm had an 2,5 cm high up kit in
and the headers are on..
(i must change the sidewinder against brand new marving headers
because the cbr1000 forks are 5 cm shorter than the forks befor
and so it is not high enough for using the sidewinder for driving
right side curves)

http://img37.imageshack.us/img37/6462/280520101041.jpg

http://img689.imageshack.us/img689/5120/280520101042.jpg

[Gix11]

That tank looks fuckin' great from behind. Those false vents work well.

[outlaw6660]

only one stage ago from finish!
exhaust, chain, rear brake and all
other parts are ready

http://img686.imageshack.us/img686/5027/070620101081.jpg

http://img411.imageshack.us/img411/1082/050620101074.jpg

my wife loves it so far..
and hopes it goes fast with the paint parts..
(she is waiting over 1 year now)

http://img229.imageshack.us/img229/6894/050620101077.jpg

http://img52.imageshack.us/img52/6165/050620101078.jpg

http://img7.imageshack.us/img7/3985/020620101067.jpg

my hope is..
i get the body parts till the end of the week...
more when i have finished the bike..

[Grouch]

Super cool bike mate :)

[outlaw6660]

now the Slabbie is finished (for this season)

http://img809.imageshack.us/img809/8356/150620101130.jpg

http://img714.imageshack.us/img714/759/150620101131.jpg

http://img695.imageshack.us/img695/3183/150620101133.jpg

http://img189.imageshack.us/img189/2986/150620101134.jpg

http://img138.imageshack.us/img138/3333/150620101141.jpg

a little list what`s new..
Frame, Engine, Fuel Tank und Speedo are the same..

FRONT:
Gds Triple trees with Handlebar clip ons
Forkcovers (thanks to Sven)
Selfmade 3 piece Handlebar ( Thanks to Andreas)
brake and Clutch mastercylinder Nissin Radial with TITAX Levers short
Mini Electriks
Mini Brake / Clutchreservoir
Frontlight CNC from Glow Spezial
Holders Thospa Customs

Frontfork Honda SC57 `07
Fullchrome brakecalipprs (original SC57)
Wave Brakedisks
PM Rim CHIKANE Fullpolished 3,5x17
Fender HESA universal
VA Holders selfmade

Rearseat customised Aprilia RSV4 Factory
rear closed
Winker Kellermann Micro 1000 DF
Seat .. Tailprotector

Swingarm GSXR1100 the longest one
reardumper chromed and polished one of my CBR 929
selfmade links..
Bremssattelabstützung eigenbau
Wave Brakedisc
PM Rim CHIKANE fullpolished 6.0x17

Headers Marving
Supertrapp 4 Inch Alu Race with 13 discs
Footpegs Chinaparts with selfmade adapters
Steehl Lines new
Fork & wingarmsliders from Tuner Factory X (USA)
Paintjob
and some little things more
and also some i have forgot in the time ..

[Gitzy]

Awesome work Torsten I love it, is your wife happy??

[Grouch]

Looks wicked mate.... Well done!! :O)

[RevHead]

that look a million bux,the 1st paint job just didnt do it for me ,

[mozza]

mate, I love the Aprillia rear end, looks awesome.

[Gix11]

Killer stuff as always Torsten. Cheers for sharing.

[FIGHTERMC]

great stuff Torsten mate

[Jed]

Love it. Looks great. The new colour is heaps better than the blue.

Cheers

[80s freak]

Beautiful work, awesome.

[kevkatana]

Top work mate. One of the best!!!

[outlaw6660]

Thanks for the comments!
and yes my wife loves her "new" bike..

[outlaw6660]

Today i made a very little clip
from my wife on her bike...

http://www.youtube.com/watch?v=0MmV5rGNeXY

[wackyrider]

What's the tail section you're using Torsten?

Bike looks great

[Gix11]

quote:Originally posted by outlaw6660

Today i made a very little clip
from my wife on her bike...

http://www.youtube.com/watch?v=0MmV5rGNeXY


That's one happy chick mate!

[outlaw6660]

Here i made a little clip on the highway

its not so easy to make a handy clip at 140 km/h
when you drive at your own..

http://www.youtube.com/watch?v=awpVmz_FruI

[Iceman]

Love your work mate. Riding on the autobahn holding a handycam... awesome effort!