Parting out a GSX750F Motor- Last call

[chopaweeza]

Oi All . Am parting out a GSX750F motor. Crank turns well and it has good compression. Apparently an ex-Metro's import.


Gearbox-$30
Crank & rods-$50
Sump cover $20
Starter $20
Alternator $20
Etc


Uncle Chopa- 0425 216326


http://i10.photobucket.com/albums/a130/chopaweeza/Parts%20for%20sale/GSXREngine004.jpg
http://i10.photobucket.com/albums/a130/chopaweeza/Parts%20for%20sale/GSXREngine005.jpg

[ozkat]

1st dibs on the head and cams, any damage or just wornout? What sort of nick is it in overall?

[chopaweeza]

Neither mate. Just been sitting for along time without plugs. Here's an underside shot of the head. The valves move well and the crap you see should clean off easily . The engines insides are pretty good too .I was suprised at just how good the engine was imternally and when the guy I bought it from said it was a low mileage Jap import I was suspect but stripping the engine down confirms it. Is $15 to post is to you TK .

http://www.streetfighters.com.au/forum/upload/84195259110902.jpg

[03gixxerpilot]

Crank & rods-$100 how much to post to townsville and what are the jornals condition

Cheers

[chopaweeza]

Haven't completed the bottom end disassembly so don't know what the journals are like. There is no endplay on the crank or movement on the rods. Have Wednesday off and will finish pulling it down then. As for postage Clive , fuckit , you & I have done enough business over the years that I'll call it $100 P&P inclusive. Will pop you a picky after I get the crank out.

[DCRacing]

Hey Chop, barrels and cases, how much for postage up to toowoomba qld?

[chopaweeza]

I'd do them for $150 posted mate. With the weight would have to ship as 2 packages.

[03gixxerpilot]

thanks chopp

[ozkat]

I dont suppose you have some 38-40mm carb rubbers to go with the head and cams?

[chopaweeza]

Nah mate

[chopaweeza]

Here you go Clive. Clean as a whistle and in great shape.

http://www.streetfighters.com.au/forum/upload/655415929143277.jpg

[chopaweeza]

And here's a piccy of the gearbox for someone . Unfortunately for DCRide The lower cases are damaged . They are cracked behind the clutch just forward of the bearing on the lower case. The top case is fine. So , DCR if you still want the barrels I'll do them for $80 posted as a consolation .

Anything left over goes on ebay this weekend so speak up or bid for it.

http://www.streetfighters.com.au/forum/upload/655415929144558.jpg

[chopaweeza]

Just found out that it's actually a GSX750F and not a GSXR . Was an honest error on my part for not checking on what the seller told me. Apologies for any confusion and all deals are off as a result. Anyone wanting F series engine bits let me know.

[03gixxerpilot]

ok thanks chopper but i already got a crank for one of those, thanks anyway

[ozkat]

Chop i sent you a pm about the head and cams but got no reply, i still want the head and cams.

[chopaweeza]

Never got it mate. Try PM'ing me again and I'll get it sorted for you ASAP .

[ozkat]

PM resent Wayne

[chopaweeza]

Cool. Have it boxed up and when the payment comes through I'll pop it in the post.

[chopaweeza]

Still have the crank & rods , gearbox , starter & alternator left. Open to offers before I Fleabay it. Cleaning out most of my parts I don't need so one way or another these will be gone soon.

[jmw76]

Hi Wayne,
Have you still got the gearbox bits?
Is the shift barrel and shift forks with it.
I would be interested if so.
Cheers
Peter.

[jmw76]

What about that oil pump I see in the pics.
Still there?
Or all gone now.
Cheers

[chopaweeza]

Yeh mate . All thats still there but the crank has sold(currently a lamp stand). Haven't had time to list them yet. Make an offer .

[jmw76]

Any idea what year it is?
Should be able to tell from the serial number.
I want to put into an 1100 and need to determine if it's compatible.