Various GSXR7/11 parts (plus others) for sale

[Gix11]

Ok gilrs, first come, first served:

USD GSXR black powder coated forks (50mm tops and 54mm bottoms), both yokes and stem (top yoke has been drilled for risers but does not have the risers they were drilled for - calipers available separately below).
$300 SOLD

Standard oil cooler (curved model) with standard lines$50

'99-'07 Busa yokes and stem $100

GSXR front brake calipers (4 piston) $50 each

Renthal motocross bars (Black), fitted but never ridden $50 SOLD

GSXR 750 shock/swingarm linkages $30

VFR 750 single sided wheel (mirror polished) $150 SOLD

Email me or shout out here.

can you measure the dog bones for me please mate?
and you got a link to those rear sets from Thailand?
cheers

[Large]

When you say "complete" front end do you mean wheel/brakes/guard too?

And are they off an 1100 or 750?

[03gixxerpilot]

si could we please have a photo of the single sided wheel

[Gix11]

Davo, Ben has all the stuff down in Sydney so I'll get him to find out. As for the link: http://www.streetfighters.com.au/forum/topic.asp?TOPIC_ID=8831

Large. sorry mate, I cut and pasted that from the other day, since then it is not a COMPLETE front end, the wheel has gone and so has the guard. The calipers are listed up there separately. I'll edit it now.

Clive, I'll get onto it mate.

[Jockney Rebel]

Si could you get me the diamensions of the rad please ? ta mate

[Lucas]

email

[Gix11]

Replied mate.

[Large]

r d fox 11 or 7?

[pappas]

Gix will a 89 model gsxr750 front wheel go straight in the USD's?

[Gix11]

Ok, here we go:



Clive, VFR rear wheel as requested:

http://www.streetfighters.com.au/forum/upload/321809495106267.jpg





Jim, oil coller dimensions as requested:

http://www.streetfighters.com.au/forum/upload/321809495207695.jpg





Davo, Linkages and size:

http://www.streetfighters.com.au/forum/upload/321809495136513.jpg


Also, the swingarm has already gone mate, along with the weels and rear caliper.




Large, Pretty sure they're 750.




Pappas, should be a straight swap. It had an '89 1100 wheel in there up until now with no spacers or anything, just a straight swap. I think the 3.5 inch rims were all the same on the 750 and 1100s. Someone here will confirm.




...and for the record:


Forks and clamps WHEEL NOT INCLUDED

http://www.streetfighters.com.au/forum/upload/321809495152770.jpg

[Iceman]

Email sent

[Gix11]

Reply sent Clint.

[wackyrider]

Do u have a pic of the front calipers and how much hassle and expense would it be to fit the USD's into a Kawa GPZ frame????

[Gix11]

I don't have a photo of the calipers mate, they're at Ben's and I didn't want to hassle him again after the last lot. They are just standard 4 pot calipers mate like these:

http://i5.ebayimg.com/01/i/000/f1/df/1874_1.JPG

As far as fitting them is concerned you'll need to find out if the stem will press into the bottom clamp of if you'll need to make up a new stem. Someone like Ivan could sort that.

[TurboKat]

Is the VFR wheel a 5" or 5.5" Guvna?

[ozkat]

Forks are 750 with a bit of work done internally

[scrotary]

i'm keen for the triple trees if someone else wants the fork stems, if anyone else has some i'll take them too,i have a brilliant and cunning plan

[Gix11]

quote:Originally posted by turbokat

Is the VFR wheel a 5" or 5.5" Guvna?


Yes.


NFI mate. I'll have to ask Ben as I've never even seen it.


AND THE ANSWER IS IN - it's a 5.5" mate.

thanks for the measurements,but not what i need.

[TurboKat]

I'll take the Viffer rear wheel thanx Si.
PM sent.

[STM77]

I'll throw my hand up for the forks and triple clamps, if no one else is keen

[Gix11]

Two guys are keen but they don't have the money yet, but I need to shift them so if you want them STM, they're yours. Email me to confirm.

[Gix11]

Ok, that's half the stuff gone. Anyone want anything else before I post it in the main forum area?

[old gsxrr]

pappas,i'm 99% sure 750 1100 -89 are the same

[pappas]

Thanks, someone's beat me to it though!

[Gix11]

Ok, into the open with this one now.

[Lucas]

Hey Gix, was there enough after postage for a patch too?

[Gix11]

Emaio me mate as I have a brain like a sieve and I'll see what we can do. Patches are really low in stock at the moment.

[DCRacing]

hey i am interested in the oil cooler do you still have it?

[Gix11]

Sure do mate. Email me.

[Lucas]

Bars turned up yesterday, cheers Si and Ben.